|
|
Jun 12, 2017 12:13:22 GMT
|
I've a flat eric in my Fezz, too. Coinky dinky right there.
Love the new rear seats, mine are in great nick but there's so much overspray on the seats and trim. There is overspray that has gone over the belt and left a nice clean patch behind it..great.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
|
May 22, 2017 12:29:30 GMT
|
That is mint. I never really see these about compared to their youngest siblings.
Body shape reminds me a lot of an AE-86.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
May 20, 2017 12:50:33 GMT
|
Got all the niggles sorted, got my wheels back and all looking tidy. Took it up Mumbles way, where I got to test out how the exhaust really sounded rather than going up my road on dodgy wheels....It's now the daily for the next few months
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
May 19, 2017 12:31:47 GMT
|
Loving this.
All I got to say.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
May 14, 2017 10:58:54 GMT
|
Could try and make this age.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
May 11, 2017 14:59:30 GMT
|
My all time favorite 80's number plate font - Now to see if I can get the same in pressed ally. I tried to get a set of these, but to no avail - is there anywhere that does plates pressed with this font at all? I used two people in the past; one that didn't take my details, which the plates were of OK quality. The second, probably the best quality and required details V5 and copy of driver license. I'll try to get the link after work for the latter.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
May 11, 2017 12:40:03 GMT
|
Is the top coat a pearl/speckle (almost metallic) finish, or block colour? If it's solid you can also flatten the lacquer with 2k and then polish fully for the final finish. If it's a metallic looking finish, don't flatten the lacquer, it will destroy then metallic look. Just go straight to polish. (Recently flattened the lacquer on my metallic green Mazda and it killed the shiny fleck look). It's just a Gloss Black, so a block colour. It came up perfect with the last method posted, just could do with a bit of polishing to really bring them up.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Apr 21, 2017 20:40:43 GMT
|
I did that exact process with some bike plastics a few years back in my shed, they still look fine to this day. I have done a few jobs myself (wheel refurbs, plastic bumpers and a spoiler, as well as plastic trims). But this time I really wanted to get it pukka.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Apr 21, 2017 20:34:30 GMT
|
Flatten it off to a finish you're happy with, add a final coat of colour then lacquer while the colour is still tacky, it will adhere better. Cheers, mate. They will have had time to harden tomorrow, so I'll give this a go
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Apr 21, 2017 20:19:15 GMT
|
Evening all. I have recently resprayed the metal bumpers on my MK2 Fiesta myself and I was looking for a bit of advice. So, it isn't going to be of a super duper quality I know (Halfords rattle cans, yup) but I was wondering is it better to flatten the paint with 1200 grit and remove the shine or just simply lacquer over what has been done already? There are bits where it isn't full of shine and certain parts have slight over spray, due to the angle I had to do it, hence why I thought I'd ask. It is instructed on the back to go with the latter, however I want to see what others reckon. Cheers
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 28, 2017 14:51:16 GMT
|
Like foldy said, hit up Outlaw if you need an adjustable Panhard Rod. He just finished a batch, so hopefully there's still some left for you. If not, give him a bell and ask when he's doing the next lot. The guy who runs let me know as soon as they went up on the site since I asked him a few weeks ahead.
Love the XR2 kit and wish I could put one on mine, but just finding some for a decent price that haven't been bashed or resprayed is a pain. I might just leave it as it is though, to be honest.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 28, 2017 11:53:43 GMT
|
More MK2s!
That colour is the dopest, honestly. I would've picked up a ghia in the exact same colour but it was an auto.
I want to see more of this in the future - you got any shows planned in the summer? Might be taking my MK2 to a few.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 27, 2017 13:56:31 GMT
|
The two cars I could've and should've had, so I cannot comment on which is better as in 'how they drive'.
I mean, they both look really, really cool and have cracking engines.
But it'd have to be the Integra.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 24, 2017 13:20:31 GMT
|
MK2s are fantastic cars, never see them about in white often either.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 24, 2017 12:49:17 GMT
|
My Pug had a lot of stuff left from my sister's nan since it was her run about, went in the boot and cleared it out. It included thick framed glasses, a Russ Conway and 'BIG SCREEN CLASSICS' tape. I don't mean to get off topic here, but surely your sister's nan is your nan?! Unless she's a step- or half-sister, I guess. Half-sister, yes. I probably should've mentioned that!
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 22, 2017 15:24:08 GMT
|
Not really strange, but as I was about to go through the effort of wiring up everything so the stereo can stop resetting every time in my Fezz I found the little unit with the fuse relay tucked in the carpet...he must've chopped it (along with all the other wires for the stereo) and let it drop. Made that job a lot easier.
My Pug had a lot of stuff left from my sister's nan since it was her run about, went in the boot and cleared it out. It included thick framed glasses, a Russ Conway and 'BIG SCREEN CLASSICS' tape.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
Mar 17, 2017 15:18:02 GMT
|
In love with this motor, just never see Metros knocking about anymore.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
|
Cool, cheers! I'll get a pic once mine is fitted I had a bit trouble last time trying to get it straight and in line! I measured and put bits of masking tape on the outside to give me somewhere to aim at when putting the decal on the inside. Good egg - will give it a go when the weather decides to be dry, then!
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
|
Been following you on ginstergram for a while now and I am a big fan, glad to see there is a thread for this motor.
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|
|
|
Hi, I've looked on your eBay listings but can't see any Renault ones, would it possible to get one in red? Hi yes I can list some Renault backflashes, I'll try and get them listed on ebay tomorrow all the best Mark Cool, cheers! I'll get a pic once mine is fitted I had a bit trouble last time trying to get it straight and in line!
|
|
F503 FRM - MK2 Ford Fiesta - (Mo Filla, No Thrilla)
T527 LCJ - S2 Peugeot 106 - (Donor car for an AX GTI - scrapped) CA57 GWP - MK6 Fiesta Zetec S - (Daily derv go-kart)
|
|
|