a multitude of landy 2a parts inc a sound original gear box (£150), truck cab(£40) and many other bits ( just ask)
good runner Jag XJS in gold, 2 sets of alloys, v12 etc-£700
specialised bighit 07 downhill mountain bike frame with fox dhx 3.0 shock and 24seven cranks £300
clinker built borwicks windermere lauch. easily seats 7, perfect entry into boating for the family.
20ish ft mahoghny boat, circa 1940, beautiful condition, on a trailer, comes with original flat twin engine ( out the boat) and I have installed and wired up a 13hp electric start engine (fitted in 07) MAKE ME AN OFFER
5.5hp briggs and stratton genny engine (horizontal shaft) fitted with go kart centrifugal clutch. 30 quid, fits the go kart below
small go kart chassis with ride on mower rear axle ( with diff) and handbrake, all made of inch box section, needs a tiny bit of welding up and pedals fitting. £100
set of 4 pneumatic rams ( taken off a huge industrial welding clamp) with joystick controls, ideal for something mad. I put these between the tractor and the wall and 2 of them pushed the tractor back at 60psi so they are POWERFUL 15 quid each or the whole lot for 50 quid. (inc controls)
all proceeds to charity
www.justgiving.com/teamlumphammer
call me 07931 646230
good runner Jag XJS in gold, 2 sets of alloys, v12 etc-£700
specialised bighit 07 downhill mountain bike frame with fox dhx 3.0 shock and 24seven cranks £300
clinker built borwicks windermere lauch. easily seats 7, perfect entry into boating for the family.
20ish ft mahoghny boat, circa 1940, beautiful condition, on a trailer, comes with original flat twin engine ( out the boat) and I have installed and wired up a 13hp electric start engine (fitted in 07) MAKE ME AN OFFER
5.5hp briggs and stratton genny engine (horizontal shaft) fitted with go kart centrifugal clutch. 30 quid, fits the go kart below
small go kart chassis with ride on mower rear axle ( with diff) and handbrake, all made of inch box section, needs a tiny bit of welding up and pedals fitting. £100
set of 4 pneumatic rams ( taken off a huge industrial welding clamp) with joystick controls, ideal for something mad. I put these between the tractor and the wall and 2 of them pushed the tractor back at 60psi so they are POWERFUL 15 quid each or the whole lot for 50 quid. (inc controls)
all proceeds to charity
www.justgiving.com/teamlumphammer
call me 07931 646230