Welcome Guest. Please Login or Register.

Clicking on eBay [or other affiliations] may result in referral commission being paid if a purchase is made.

The workbench thread.

bshaw Part of things Posts: 149	The workbench thread. bshaw @bshaw
	Jul 19, 2020 18:00:40 GMT Select Post Deselect Post Link to Post Back to Top
	One I made a year or so back for the unit It's a biggun, 2x1m 6mm plate Currently cut up in 3 peices though during a unit move Will try improve on the setup in the new unit.
	PH1 Renault Sport Clio 172

	oldisbetter likes this Reply Quote

hario Part of things S202 C300STD Posts: 421	The workbench thread. hario @hario
	Sept 23, 2020 8:49:30 GMT Select Post Deselect Post Link to Post Back to Top
	Mar 27, 2020 9:31:55 GMT Dez said: Here's some trivia for you, I just finished working on an office conversion project in Whitechapel, the building used to be a steel forge! Odds on it being the old Record vice casting place!! Cool!
	S202 C300TD Wagon Installed: OM606 & 722.6, Evo6 IC, S600AMG callipers & 345mm rotors. No catz. Leatherish seats.. Rust.. Future: DIY manifolds & turbo compound build. Built IP, & some kind of software. Less rust..

	Reply Quote

perf Part of things Posts: 37	The workbench thread. perf @perf
	Sept 27, 2020 20:28:30 GMT Select Post Deselect Post Link to Post Back to Top
	Bench 450x1800mm. No more deep. Prefer Bofors vice.


	Reply Quote

oldisbetter Part of things If it has a ECU it's complicated :) Posts: 478	The workbench thread. oldisbetter @oldisbetter
	Oct 3, 2020 14:12:36 GMT Select Post Deselect Post Link to Post Back to Top
	I recently cleaned up and fixed the quick release on a Paramo no.38


	eternaloptimist, sLowered, and 2 more like this Reply Quote

exuptoy Part of things Posts: 145	The workbench thread. exuptoy @exuptoy
	Oct 11, 2020 5:09:12 GMT Select Post Deselect Post Link to Post Back to Top
	If this is a bench thread and not a vice thread (Rob! ) then I think this is the right place. I had a Bott tool box and decided to purchase a second and build a bench around them out mainly of 3x2’s and some offcuts of 9x3 then fixed 8x2’s as a top then covered them with a sheet of plywood edged with unequal angle (15x30mm I think) and cut down a couple of old kids wardrobe drawers and made them fit the space between.
	Last Edit: Oct 11, 2020 5:15:22 GMT by exuptoy Chaos..panic..destruction..my work here is done, My Cooper rebuild

	Pid363!, forkliftfred, and 13 more like this Reply Quote

Retro Rides Privacy Statement