ok well here will be a mad random selection of bits tyres, books, mirrors, wheels, hubcaps,,, really allsorts
ok some stuff is on ebay now will delete as and when sold or pm me with offers.
location is near bath in somerset
so here goes will add to this as I get more pics and will remove sold stuff..
HILLMAN IMP BOOKS.....
and a few workshop manuals 2x haynes (1x quite early with yellow/baige softback)
1x intereurope manual..
1x small paperback pitman book falling appart and shabby..
and a genuine chrysler uk ringbinder manual with revision supliments inside..
very cool....
will get pics up later..
retro universal spoiler hard rubber so flexable and will fit any curve..
painted white and 1080mm long
25 quid...
some workshop manuals..
each a £5 posted. the vw beetle one is 4 quid posted.
*rover 800 manual is sold*
a capri mk3 grill in grey..
15 quid posted or 10 collected
volvo 740 intercooler..
good condition often used for upgrades on 200sx etc..
27" wide over its widest point at the pipe conections
22.5" wide over the parrallel sections of the sides.
17" high and around 2" thick although core is only around 1.5"
10 quid for this..
4x old petrol cans
pratts one and esso one 15 quid each
plain ones 10 quid each.
a few more:::
talbot sunbeam master cylinder and servo.
ive had this years from my old car. it worked fine but its been in the garrage for years so prob best strip it to check..
5 quid!
a set of 5 hubcaps think they are hillm[/s]an imp IIRC..
would polish up ok but not perfect.
10 quid the set..
new unused water swirlpot in aluminium..
bought for a project but never used..
both hose connections are 30mm
will best need a polish as has tarnished with storage.
30 quid posted..
pair of lucus spot lamps.
30 quid a pair....
old steering wheel lock crooklock type thing.
10 er posted..
a new never used winch motor superwinch.. no drum or anything been stored for years in shed still works fine either fix/refresh your winch or build one or just use for project..
12v very powerfull.
10 quid prob another £10 for delivery (its heavy)
ford v8 aircleaner from my old 429 thunderjet will fit any old holly type carb looks cool patina...
maybe just hang on your wall.
15 quid prob 8 quid post?
got a bigblock ford 460/429??
got these cool old power by ford tin rocker covers too..
again good on the wall or shelf tat??
got at least one breather too.
gota ask 35 quid for these seem to make good money now...
post for 8 quid..
also some other bbf parts few pullys engine mounts manifold std cast, starter alternator etc.. just ask
silencer about 700mm long approx 42mm dia pipes also stainless.
about 2 meters long all in all
17 quid?
got a tatty 12 inch wheeled nasty painted no engined rolling pitbike chassis with some panels and tank/seat..
good for project??
10er..
hillman imp coupe glass rear 1/4 glass both sides with tatty but usable rubbers
both door wind up glass
and both front opening 1/4 glass one with frame
si
got a seperate wheels thread now too should make it easier..
ok some stuff is on ebay now will delete as and when sold or pm me with offers.
location is near bath in somerset
so here goes will add to this as I get more pics and will remove sold stuff..
HILLMAN IMP BOOKS.....
and a few workshop manuals 2x haynes (1x quite early with yellow/baige softback)
1x intereurope manual..
1x small paperback pitman book falling appart and shabby..
and a genuine chrysler uk ringbinder manual with revision supliments inside..
very cool....
will get pics up later..
retro universal spoiler hard rubber so flexable and will fit any curve..
painted white and 1080mm long
25 quid...
some workshop manuals..
each a £5 posted. the vw beetle one is 4 quid posted.
*rover 800 manual is sold*
a capri mk3 grill in grey..
15 quid posted or 10 collected
volvo 740 intercooler..
good condition often used for upgrades on 200sx etc..
27" wide over its widest point at the pipe conections
22.5" wide over the parrallel sections of the sides.
17" high and around 2" thick although core is only around 1.5"
10 quid for this..
4x old petrol cans
pratts one and esso one 15 quid each
plain ones 10 quid each.
a few more:::
talbot sunbeam master cylinder and servo.
ive had this years from my old car. it worked fine but its been in the garrage for years so prob best strip it to check..
5 quid!
a set of 5 hubcaps think they are hillm[/s]an imp IIRC..
would polish up ok but not perfect.
10 quid the set..
new unused water swirlpot in aluminium..
bought for a project but never used..
both hose connections are 30mm
will best need a polish as has tarnished with storage.
30 quid posted..
pair of lucus spot lamps.
30 quid a pair....
old steering wheel lock crooklock type thing.
10 er posted..
a new never used winch motor superwinch.. no drum or anything been stored for years in shed still works fine either fix/refresh your winch or build one or just use for project..
12v very powerfull.
10 quid prob another £10 for delivery (its heavy)
ford v8 aircleaner from my old 429 thunderjet will fit any old holly type carb looks cool patina...
maybe just hang on your wall.
15 quid prob 8 quid post?
got a bigblock ford 460/429??
got these cool old power by ford tin rocker covers too..
again good on the wall or shelf tat??
got at least one breather too.
gota ask 35 quid for these seem to make good money now...
post for 8 quid..
also some other bbf parts few pullys engine mounts manifold std cast, starter alternator etc.. just ask
silencer about 700mm long approx 42mm dia pipes also stainless.
about 2 meters long all in all
17 quid?
got a tatty 12 inch wheeled nasty painted no engined rolling pitbike chassis with some panels and tank/seat..
good for project??
10er..
hillman imp coupe glass rear 1/4 glass both sides with tatty but usable rubbers
both door wind up glass
and both front opening 1/4 glass one with frame
si
got a seperate wheels thread now too should make it easier..
