Whats 5 x 120 in old money

5x4.72

Hmmm not common then wonder if 5 x 4.75 is close enough

Close enough I reckon ;D

Yeah isn't 5x4.75in a common Yank size? Wobble bolts'll get rid of that extra .65mm.

Wheels look

Was Vauxhall under GM back then? They are probably exactly the same PCD. I wouldn't have thought you'd even need wobble bolts, just normal sleeved taper bolts would have enough play to take up 1/3rd of a mm.

It's for the Commodore rather than the Monza

I don't have an ideal pic for chopping but try this



If you are really bored change body colour to Orange ;D

This is my inspiration for paint



Except no stripe just satin/matt black bonnet and boot

As another example, on C4 wheels - 8.5J and 16" - again, 5x120.65 so will need 'adjustment'



Or a bit darker:

Just thought I'd point out I put the C4 alloys on backwards LOL, brake cooling ducts should face the other way! (Added benifit of them, forced air cooling of your brakes! )

Wasn't paying attention!

Yea, most C4 wheels are directional - even the later ones have brake cooling ducts

Mine are on back to front in places at the moment in real life, hehe Scallops should point forwards to draw air through the discs and calipers



Also availiable for chopping!

And the ones on the '95, if required