Well when I first bought this Corsair I was thinking about converting it to a van. But after much homework and measuring up there isn't anything close enough. Main issue is the length of the Corsair pickup being a little over 6 ft.
So what I'm going to do is what was first intended and carry in with the pickup. I've been thinking of many ways in doing this and finally got my plan. Been only one other pickup known I don't want it to look alike as this would of been too easy to copy cat it. So hope you'll like my interpretation of a pickup.
So first of all was to cut open the rear doors and even up the panel gaps up a little.
Next I started to construct the buck. Looks Heath Robinson but it'll be more explanary next time I post up. First up is cut into the B panel and put into it a 25 x 50 mm box section and attach it to the rear. This will give a nice straight edge for the buck