gib
Part of things
Posts: 163
|
|
|
Urgent help required, Long story short,
They have 2 Glass sliding windows out of a vehicle and in their way. Any chance somebody could collect and then a Friend who lives in SSheilds will collect from you at the end of the week.
They are ~ 1m *0.7m Glass in Ali frames with rubber seals ~ 10Kg each.
Please PM if you can help. All payments will be sorted before hand, simple collect and store.
|
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
If at all possible, but only if its no hastle. The front calipers are the same as used on my Gwagen and i w/could do with a spare set.I can collect from A52 and there is no desperate hurry. Beer tokens or cash would be deposited as they are heavy awkward to get off and they are going to be dirty.
TIA
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
Early 900's ( up to mid flat fronts) use 114 PCD , just to add confusion they use a different center bore to 99's
|
|
|
|
gib
Part of things
Posts: 163
|
|
Feb 14, 2011 17:46:57 GMT
|
Do they have to be 15" i have a spare set of 16" as shown in the pictures below. Pm if you need more details They are comp TH2 gravel spec. sorry only shots i have on the car
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
Need a cheap kenlowe or copy fan contoler. Would prefer adjustable if possible.
|
|
|
|
gib
Part of things
Posts: 163
|
|
Dec 23, 2010 15:49:45 GMT
|
I would be interested as at the moment got the garage full of stuff and 2 cars needing homes. I am based in abingdon and could do with some where private with power. I have my own kit would be willing to go to ~£80-100 a month min period 6 months.
Current projects: 84 Saab 99gl stripped caged and with 16Vt running gear G wagon toy 81 Ur quattro long term.
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
PM'ed
|
|
|
|
gib
Part of things
Posts: 163
|
|
Dec 13, 2010 15:50:34 GMT
|
I need to have a set of brake shoes collected from Serck ( Days rd by the feeder). Problem is it needs to be in office hrs and i am in Swindon during the day. Could you collect ( all parts paid for) take the box home and i will call at your house or where ever to collect them from you that evening.
Any help apreciated.
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
Does any one have pictures of the original Sbarro car that this is a homage to?
|
|
|
|
gib
Part of things
Posts: 163
|
|
Sept 29, 2010 10:17:40 GMT
|
I have a spare set of 4 of these, 16" 5.5J (suitable for up to 205 )Compomotive TH2 they are full gravel spec, inserted etc. They are silver but look ok in black or dark grey. ANd strangely enough came of the Hyundai world rally car so are very suitable. these are the last 4 i want too sell.
|
|
|
|
|
gib
Part of things
Posts: 163
|
|
Sept 20, 2010 7:28:50 GMT
|
The Saab is getting a bit closer to completion but its just a toy and i prefere driving than cleaning.
Note to self must at least make some sort of effort before parking up with nice cars.
Note to others who went there: Vectra + loud stereo + sunday morning ,,,,,,,,,,,,,,,,, NO.
|
|
|
|
gib
Part of things
Posts: 163
|
|
Aug 25, 2010 15:10:17 GMT
|
Unfortunately the it fits on this so it will fit on that is not so straight forward esp using power columns. I have a an 82 99 with a 16VT and when i stripped it out, checked and designed some mounts for a 900 rack as they are not to difficult to make. They key issue is the angle of the rack to steering column. I was concerned about this especialy considring the ratio so discounted a powered column as the torque and mounts would be a head ache. There is a guy in scotland who is currently making a stage car that is going down this route check uksaabs.co.uk. I am still looking at a seperate electric pump single speed with external switch ( no speed signal) Have a look on my page here as i have a load of pictures showing parts of the build and there should be some with the 900 rack in place. s380.photobucket.com/home/gengis-khan/recentuploads?page=1
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
If you are adjusting the F and P pot take your time and make sure it doesn't over shot also be aware the fuel cut off is 1.2Bar which you can get on spikes.
Take the base boost up to 7psi about 4 truns of the waste gate actuator.
Take of the elbow and replace with at least a 2 1/2" bend ( skip dive and make you own) or by 3" wide swept bends from gencat and make up your own. T3 outlets from ebay US.
Clamp the FPR in a vice, rig an air line so you can check how much to clamp it by and aim for 3.3bar.
Add a knock LED
Depending on your driving style take the front arb off and see how it feels compared to having one on some like some don't.
don't bother aiming for more than 220bhp as it costs gearboxes first then turbo's.
Change the IC as they heat soak badly.
Cut the top 2 inches of the air inlet / blower vent under the bonnet as this lets more hot air out (they get V hot under the bonnet).
Long term but actualy cost get an early 2L16VT 9000 with T5 use all the parts to convert to T5 and sell the rest on numerous people have done this and found a car for less than £400 and the spare parts can be sold for ~ £400 so just add time.
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
Would prefere genuine but would consider a copy.
Cash waiting along with a non running car.
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
Does any one have 1 or 2, 16" (or 17") with PCD 4 * 114. Alloy or steel i need this as a spare but would take a couple or possibly a set. With or with out tyres.
Cash waiting based in Abingdon ( by Oxford).
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
I need a Blue or red top Facet pump to try out a new setup please Pm me with details.
|
|
|
|
gib
Part of things
Posts: 163
|
|
Jan 27, 2010 12:58:26 GMT
|
The Blue CX has a loadrunner rear axle setup and hatch but as far as I know they didn't do the centre stretch. The silver blue NASA Loadrunner is one of the nicest around.
The red DS is of more interest as this looks like a Paris Match car, I don't know the exact history but Rich French socialites were rather annoyed at not getting there copy on the day of release whilst sunning them selves on the south coast. Paris Match made a hand full of 6 wheelers with serious engine mods that could happily run down to the south of france at extreme speed to make a timely delivery.
The same company that did the mods also worked with Tissier ( some body post a good pic of the helicopter carrier PLEASE I only have a curse word low res one) and also produced some seriously odd / powerfull cars esp CP cars as used in Ronin which is why people who know Citroens have a wry grin when everybody says the S8 would walk over the XM.
|
|
|
|
gib
Part of things
Posts: 163
|
|
|
I would like to get hold of a daihatsu badge, it needs to be the script type not a square font. Not to bothered about cosmetics as long as its in 1 piece or can be glued sprayed etc. to look ok.
No idea how rare these are so please post with pic and price cash waiting.
|
|
Last Edit: Dec 2, 2009 14:41:43 GMT by Oldbus
|
|
gib
Part of things
Posts: 163
|
|
Nov 17, 2009 17:11:38 GMT
|
Brother has been playing with this for a few weeks. Aim to get it sorted for next year. (some body please sort these pic out if this doesn't work TIA)
|
|
|
|
gib
Part of things
Posts: 163
|
|
Aug 14, 2009 12:19:37 GMT
|
Pm coming your way.
|
|
|
|