I took this out of my 106 to put a 16v in, it was from a really really low miles Saxo VTR. Absolutely great engine, tight, quiet and dry. Used no oil or water. Off the top of my head it was just under 30K miles when it went in, and it did one track day at Blyton and then about 1000 miles as a runabout.
I was running it on the standard 1.4 XSi loom, ECU and inlet which I've done in several cars before. The ECU seems to run the extra 200cc fine, but the idle can be a bit up and down as it warms up. Good on fuel and plenty fast - just shy of 100bhp. Here's a video of it on the trackday: (I won't pretend it's not had any hammer, but it's the sweetest engine I've ever owned)
I was hanging onto it because it's a really sound engine that I'd rely on to get me to the moon and back, but I've lost my storage for it so it needs to go.
I'm after £50 ONO for the engine alone, or £80 for the engine, loom, coil, unlocked ecu and all the inlet etc, ready to bolt in to any 106/saxo/AX. I can offer some advice on wiring, which shouldn't be a big job into any of the above cars (3 wires to make it run, the rest are for guages and lights)
Collection only from my mates workshop in Manvers (near Ventura, Wath upon dearn area)
I was running it on the standard 1.4 XSi loom, ECU and inlet which I've done in several cars before. The ECU seems to run the extra 200cc fine, but the idle can be a bit up and down as it warms up. Good on fuel and plenty fast - just shy of 100bhp. Here's a video of it on the trackday: (I won't pretend it's not had any hammer, but it's the sweetest engine I've ever owned)
I was hanging onto it because it's a really sound engine that I'd rely on to get me to the moon and back, but I've lost my storage for it so it needs to go.
I'm after £50 ONO for the engine alone, or £80 for the engine, loom, coil, unlocked ecu and all the inlet etc, ready to bolt in to any 106/saxo/AX. I can offer some advice on wiring, which shouldn't be a big job into any of the above cars (3 wires to make it run, the rest are for guages and lights)
Collection only from my mates workshop in Manvers (near Ventura, Wath upon dearn area)