I'm considering lowering leaf springs by about 2 inches. I have considered lowering blocks but they only go down by an inch, and I hear even in standard power axle tramp can become an issue. I'm hoping (depending on what I do) to go to a minimum of around 150BHP, probably around 170ish with V8 power, I'm not sure if this will affect things for me.
One persone mentioned flipping one of the main leafs around, but how would I go about this, and where could I get it done? I'm based in Warwick.
Cheers guys .
One persone mentioned flipping one of the main leafs around, but how would I go about this, and where could I get it done? I'm based in Warwick.
Cheers guys .