So here is a blast down memory lane!
I've just remembered this old post from 4 years ago! Things have changed a bit since then....
We are still on the same site, but our workshop was partitioned from a much larger industrial unit and we have now had two phases of expansion into further units within the same building. We now occupy 7500 sq ft and have separate bodyshop, fabrication shop and assembly shop areas as well as a clean engine build room, large office/parts counter, machine shop, and extracted blasting room for stripping bodyshells back to bare metal.
It seems like our feet have barely touched the ground in the last 4 years, in fact some of our facilities have even been built and then superceded in that time, like the floor extract paint booth we custom built from a Mezzanine in order to make use of the space above. This has served us well for 3 years, but three weeks ago we ripped it down to make way for a Burntwood Elite booth/oven to further improve our facilities.
This is how things look now:
I've just remembered this old post from 4 years ago! Things have changed a bit since then....
We are still on the same site, but our workshop was partitioned from a much larger industrial unit and we have now had two phases of expansion into further units within the same building. We now occupy 7500 sq ft and have separate bodyshop, fabrication shop and assembly shop areas as well as a clean engine build room, large office/parts counter, machine shop, and extracted blasting room for stripping bodyshells back to bare metal.
It seems like our feet have barely touched the ground in the last 4 years, in fact some of our facilities have even been built and then superceded in that time, like the floor extract paint booth we custom built from a Mezzanine in order to make use of the space above. This has served us well for 3 years, but three weeks ago we ripped it down to make way for a Burntwood Elite booth/oven to further improve our facilities.
This is how things look now:
