|
|
|
|
|
Would like to fit some nice wheels with low tyres on the barkas the pcd is what i been told is 5x140 been told yank wheels could fit.Also any iea how to lower a barkas.  |
| |
Peace,Max signature height = 80px
|
|
J1MMY
Part of things
Posts: 953
|
|
|
|
|
5 x 159.7 (5 x 5.5")
Ford F truck up to '96/'97 or so IIRC then they went to 5 x 135.
Suzuki Vitara
Certain Dodge Trucks
About all I know. Worth checking hot rod and american sites, some wheels have twin PCD's drilled and Unilug hubs too.
|
| |
Your opinion is invalid, I've seen your wife.
|
|
|
|
|
|
|
|
These are 5 by 5 inch. A good few Yanks run them - but your prob is the very large centre bore hole-at least 100mm -and even then you have to shave the rubber hub covers..
|
| |
|
|
J1MMY
Part of things
Posts: 953
|
|
|
|
|
5 x 5" is 5 x 127mm so if thats the case scrub my above post lol.
5 x 127.....off the top of my head
mid/late '90's Cherokee jeeps
rover P6
Chevy day vans
Depending on the wheel you may be able to machine the centres out, have done it before with no probs but it does depend on the wheel.
|
| |
Your opinion is invalid, I've seen your wife.
|
|
