|
|
Mar 21, 2009 19:52:57 GMT
|
right chaps, anyone wanting triumph 2500s parts, I have everthing apart from the engine & box
got the shell, doors, bonnet, boot, shocks, new old stock parts, stainless exhaust etc
2500s alloys with brand new tyres
PM me for my number
all parts in coventry! & off the car ready to collect
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
Mar 21, 2009 20:03:28 GMT
|
Don't suppose you've got the full set of wheel nuts for those 2500s alloys?
Phil.
|
|
|
|
|
|
Mar 21, 2009 20:34:34 GMT
|
philball may do i'll have a look 2moro as i have the car at my unkles
also to everyone, all parts are up for cheap beforew i put them on ebay,
das with all the guages etc etc everthing on the car was in running order in cluding the brakes
also have a large alloy fuel tank with feed/return & breather
i have some mini parts i just need to sort them out, alot of new parts such as mini special/standard arches, carbs, possibly a 200mile only maniflow centre exit, 998engine&box needs re-build, if you have a mini PM what ya need i'll see if i have it, i have no wheels though
the shocks are my most pricey parts at £40 the pair i have 2 sets of rear dampers & two sets of front struts all are new & unused
the rest is £10 or less
i have a suzuki super-carry 2003 with 45,000 genuine miles, used today to pick up some chairs from folkstone, shes t&t & ready to use £2600 no offers its a top van, my dads private van that does'nt carry heavy loads, heavy-ist load was a a+1275 block crank rods pistons, its clean as a whistle & cost curse word all to run
may have a r reg toyota starlet with a dented boot & FSH less than 60,000, my mums car £800 it drives perfect needs nothing full t&t
lots of stuff i have to sell & make space to carry on with my car love :OP
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
Mar 21, 2009 21:03:21 GMT
|
just having a squiz around I may have!!!! I have to ask my father first
a rover t-series turbo engine & box with the Torsen lsd with all parts to fit into anther rover, subframes & driveshafts + front & rear disk brake setups & a stainless exhaust, me & my father removed them ourselves & the car was driven home & it ran perfect, my father is picky about engines he buys & its a cracker,good turbo that does'nt smoke although it has some play, my dad was/is/maybe putting it in his rover 414 saloon but is unsure it owes home £450 but i'm unsure if he'll sell it yet! but maybe for a serious buyer he may let it go, as most of you know the t-series is a great engine to put in many classics
I have a gearbox adapter plate that allows a rover v8 to bolt onto a triumph 2000/2.5/stag/j-type gearbox £60 is what it owes me & its a straight enough job
mini clubman shell with panels to finish, the shell has been blasted & undercoated & is no rot-box is a 77 & has v5 it owes me £250 & i'll include other mini bits
powdercoated mini subframes in gold + suspesion components mini shocks, new soundproofing I have cans of 2k car paint less than 18 months old in various colours, brg,red,gunmetal,white etc etc mini doors 2 that need door skins
in all fairness if i could afford a camper now i'd load it up & go to a few shows & sell all i have asap
reason i'm selling most/the majority of my car stuff is i've finaly decided to get a van/camper to travel the uk, i've been humming &haring for 3-4yrs & come so close to buying a camoer to many times & got somat else, the time has come I want to do it! so i'm selling all I have basicly apart from my beloved turbo mini
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
bumpty
yes phil i have wheel-nuts, i'm just checking all the threads are ok
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
ihave pics of all my parts just PM me & i can email them
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
I'll definately have the wheel nuts off you if they're ok.
|
|
|
|
|
|
|
heres the wheels, they need a bit of flatting & polish & I can do them with or without tyres, the tyres on them are new so i'd want what the tyres cost, £60 """without tyres""" I spose, & theres 5 rims phillball, i've just hoaxed out my bag of nuts teeeheeee & i'll make the point 2nite to check i have the full set, i think i have though
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
i have a plain black bucket seat with harness holes, looks like a courbou (however you spell it) forza copy! its black, it top condition aprt from a teeny nibble from a mouse at the back or the seat-base cusion, its hardly noticeable in all honesty, i'd have to point it out, its a fibreglass seat & has for threaded studs on the base, ready to use, £35?
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
cant find the pic at the moment but I still have some 7x16 tsw type r's in 4x100 in good condition with usable 45 profile treads £100 also have 2 vespa pk frames one is a cutdown, one with a 80cc motor, a wiring loom to be able to fit a px engine & all parts to finish apart from forks, £open to offers 1992/3 rover 414 bonnet, red mint £offers rare as fooook "dymag" 4x114 et32 7.5x17 with tyres that are just legal, & they could do with a sand & re-paint, i may keep them yet though :? hmmmm? £testing the water
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
|
Any chance of a 2500S dash piccy and price, is it the dolomite style, as I'm after doing a dash for my Clubby Est
|
|
Allan and Gromit the Growler. Hustler 6 - work in progress
|
|
|
|
|
I'm after prices for the stainless exhaust ( as I remember it will fit a 2500TC, although the engine is going into a spitfire lol), also what type is it. 6 into 2 into 1 maybe??
also I'd like a price for the rev counter ( if it had one) and is this item electronic or mechanical. DO you have a photograph of the dashboard as I may well need some triumph bits.
just a note to the chap above me, the rev counter wont fit a mini if it is out of a triumph 6 easily, the cables are different ( on mine anyhow) and if it is electronic its set up differently
|
|
|
|
|
|
|
clubby its a very simular to the dolly dasboard, its just the wooden binicle with "all" the clocks in, i think speedy cable do a cable off the shelf for the rev counter! all the guages were woking a week ago when i took them out & i have left the dash loom attactched to it so the wires can be matched/spliced into anther car using wiring diagrams, i'll get pics on satarday & post them up
i have no stainless fanimold for truumph, its just the exhaust, i'm unsure about selling it yet, but.... the details are its a chris witor item which bolts from the cast manifold back, i even have the gasket, its still a well usable gasket! i did clip thetip of the pipe with a sandy disk on my grinder :/ bits its in perfect order otherwise
if the clubby does'nt want the dash then the rev counter is up for you
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
I just re-read that post and realised it looks like i'm trying to do the chap with the mini out of a part, let me make it clear i'm not. Just as I remember mini REV counters are ELECTRONIC and even if this guage IS electronic, one that is made for a 6 Cyl engine will not fit a 4 Cyl engine without modification.
Just so that the gent is not presented with a nasty shock upon opening it.
|
|
|
|
|
|
|
understandable, no worries
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
Mr Maggot going by what Mr Pod said, its probably better for me to look for a 4 cylinder one, thanks for the reply anyway.
Mr Pod, do you know if the dolly one is a 4 cylinder leccy one
|
|
Allan and Gromit the Growler. Hustler 6 - work in progress
|
|
|
|
Apr 10, 2009 17:06:45 GMT
|
NO WORRIES CLUBBY! if you want the other gauges in the panel you could prob source a 4-cylinder rev counter to fit from a dolamite!!!!
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
Apr 10, 2009 17:22:09 GMT
|
How much do you want for the complete Dash ? I could then source a 4 cyl tacho on ebay
|
|
Allan and Gromit the Growler. Hustler 6 - work in progress
|
|
|
|
Apr 10, 2009 21:15:43 GMT
|
call it ermmm i dunno £30, i'll PM a lint for you too, its not me selling the other item!
|
|
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
Apr 10, 2009 21:46:09 GMT
|
can I just ask at this point, IS the rev counter electronic or mechanical?
|
|
|
|
|