Would anyone here have any use for an EFi plenum, intake manifold, thermostat housing and cold start injector/water temperature sender.
As far as I'm aware it's off a 3.5 EFi.
The insets in the casting on the top of the plenum housing are painted red.
They're one complete assembly at the moment and I wouldn't be looking for much for it - say 20 quid.
Just outside MK - can get a picture or two if anyone wants it.
As far as I'm aware it's off a 3.5 EFi.
The insets in the casting on the top of the plenum housing are painted red.
They're one complete assembly at the moment and I wouldn't be looking for much for it - say 20 quid.
Just outside MK - can get a picture or two if anyone wants it.
