1985 Mazda RX7 Parts

In order to progress some projects to a conclusion I've have decided to push out the bits which realistically I aren't going to use/need so by dint of no longer keeping the mazdas except their engines

Pair of axles for the 1st Generation/Series 3 vehicles.Was going to fit one under the Rotina but sticking with the english rear axle that's already in there and upgrade it over time(ie when it breaks halfshafts etc!).Cheap enough at £15 each or £20 for the pair - can't deliver sadly so buyer must collect but will throw in free mug of coffee with any purchase. Units are 148cm from across the outer faces

Have got some other S3 parts - doors/sunroofs(both in ok condition but not rotten)/wings/headlights/bonnets and various other bits - but no engine/box/props etc. Bid me for the lot, come and fill your boots so to speak - shell getting weighed in so everything else can go cheaply.

This is the vehicle it's going in a couple of weeks so anything you fancy come on over it'll be cheap.

Set of wheels(4) £25 as below - plenty of tread but budget tyres