kevfromwales
Posted a lot
the conrod's REALLY out the block now!
Posts: 3,909
|
|
Sept 14, 2008 20:29:22 GMT
|
|
yes, my akku motors supplied th400 is fitted, and works, but the sump leaks like ker-azy as it is banana shaped along the flange
I'm going to have a bash at straightening it out, but if anyone out there has an alloy sump on the shelf I'd be interested for sure!
cheers! - kev
|
| |
Almost on the road: b11 sunny breadvan, e36 tds, 325i skidcar,
nearly there: ford f250 tathauler, suzuki alto, u11 bluey
not for a while: ford pop, 32 rails,
not in this lifetime: ruby, '29 hillman
''unfortanatly I'm quite old and scruffy and in need of some loving. my drive shaft needs a new boot....''
|
|
|
|
|
Sept 22, 2008 13:24:44 GMT
|
|
anyone got two? I need one as well LOL
|
| |
1941 Wolseley Not Rod - 1956 Humber Hawk - 1957 Daimler Conquest - 1966 Buick LeSabre - 1968 Plymouth Sport Fury - 1968 Ford Galaxie - 1969 Ford Country Squire - 1969 Mercury Marquis - 1970 Morris Minor - 1970 Buick Skylark - 1970 Ford Galaxie - 1971 Ford Galaxie - 1976 Continental Mark IV - 1976 Ford Capri - 1994 Ford Fiesta
|
|
kevfromwales
Posted a lot
the conrod's REALLY out the block now!
Posts: 3,909
|
|
Sept 22, 2008 16:00:20 GMT
|
|
I got mine off chevymotors on ebay ak, very good to deal with in the past for stuff, the alloy rocker covers I got for my 305 were really impressive quality
I paid 40 quid plus post for mine, but it seems to have been the last one they had in stock!!
- kev
|
| |
Almost on the road: b11 sunny breadvan, e36 tds, 325i skidcar,
nearly there: ford f250 tathauler, suzuki alto, u11 bluey
not for a while: ford pop, 32 rails,
not in this lifetime: ruby, '29 hillman
''unfortanatly I'm quite old and scruffy and in need of some loving. my drive shaft needs a new boot....''
|
|
rysz
Club Retro Rides Member
Posts: 2,559
|
|
Sept 22, 2008 16:48:19 GMT
|
|
If the sump isn't bent too bad, what is the possibility of getting it as good as you can and then getting a machining shop to just face it off with a mill? Is there enough meat on the flange to do that? Might be cheaper than you think!
Rysz.
|
| |
|
|
kevfromwales
Posted a lot
the conrod's REALLY out the block now!
Posts: 3,909
|
|
Sept 22, 2008 19:34:37 GMT
|
|
dunno about ak's but mine is veeery thin indeed - deffo not enough to machine flat - good idea though!
- kev
|
| |
Almost on the road: b11 sunny breadvan, e36 tds, 325i skidcar,
nearly there: ford f250 tathauler, suzuki alto, u11 bluey
not for a while: ford pop, 32 rails,
not in this lifetime: ruby, '29 hillman
''unfortanatly I'm quite old and scruffy and in need of some loving. my drive shaft needs a new boot....''
|
|
|
|
|
Sept 23, 2008 7:38:48 GMT
|
|
very thin. I think I will just try straighten mine. The early TH400 like mine has a different sump anyway.
|
| |
1941 Wolseley Not Rod - 1956 Humber Hawk - 1957 Daimler Conquest - 1966 Buick LeSabre - 1968 Plymouth Sport Fury - 1968 Ford Galaxie - 1969 Ford Country Squire - 1969 Mercury Marquis - 1970 Morris Minor - 1970 Buick Skylark - 1970 Ford Galaxie - 1971 Ford Galaxie - 1976 Continental Mark IV - 1976 Ford Capri - 1994 Ford Fiesta
|
|
