I got a little bike. Is the same as one on here.
Is tiny wee, and difficult to get on it. I'm 5 foot 8.
Ive got a handle bars from a Raleigh. Not a Chopper. Is supposed to be the Wisp, motorbike ones. So fitted them.
Is still tricky to ride.
I took the seat pin out. Is 25.4mm diameter. and 230mm long. I looked in my box of parts. A 300mm one, 11 3/4". Is a bit better.
Ive seen seat pins at 400mm long. Have to get one.
The cranks are 95mm long, with a 29 tooth chainring, on a standard square taper axle. Could change them for other cranks. But the BB axle height is only 7". Adult bikes are 11". So the pedals would be near the ground with longer cranks.
The wheels are 6" plastic, with a coaster brake. Its got a 16 tooth cog, which is the older hub gear type. So I could raise the gearing a bit by changing that. Ive got a 14 tooth cog. Will try that. Look to get a smaller one.
Was biking on the pavement in front of my house and a police car drove past. He gave me funny look. ;D
Is tiny wee, and difficult to get on it. I'm 5 foot 8.
Ive got a handle bars from a Raleigh. Not a Chopper. Is supposed to be the Wisp, motorbike ones. So fitted them.
Is still tricky to ride.
I took the seat pin out. Is 25.4mm diameter. and 230mm long. I looked in my box of parts. A 300mm one, 11 3/4". Is a bit better.
Ive seen seat pins at 400mm long. Have to get one.
The cranks are 95mm long, with a 29 tooth chainring, on a standard square taper axle. Could change them for other cranks. But the BB axle height is only 7". Adult bikes are 11". So the pedals would be near the ground with longer cranks.
The wheels are 6" plastic, with a coaster brake. Its got a 16 tooth cog, which is the older hub gear type. So I could raise the gearing a bit by changing that. Ive got a 14 tooth cog. Will try that. Look to get a smaller one.
Was biking on the pavement in front of my house and a police car drove past. He gave me funny look. ;D
