MEMS can't be remapped. All a chip does is remove the boostcut. The standard intercooler is pretty tiny too. My Ti saw intake temps tripping my gauge out at 50degC with the stock ic
To see 230bhp, you'd need more than just boost cut removal, despite what MOTOBUILD might say, and stock internals become questionable above 13/14psi
I got the figure from a Superchips catalogue, it reckons +30bhp for £499 fitted. Will it just be to remove the boost cut then?
yeah, check it out on rovertech.net. many many people have tried to crack MEMS, but it just can't be done. There was a fella on there that knocked up a few little pcbs for about a tenner that will remove the boost, just to show there is nothing involved in what the big names charge a fortune for!