Clicking on eBay [or other affiliations] may result in referral commission being paid if a purchase is made.

Rear seat belts strengthening plate w captive nut

mull Part of things Posts: 296	Rear seat belts strengthening plate w captive nut mull @mull
	Apr 20, 2008 6:28:22 GMT Select Post Deselect Post Link to Post Back to Top
	As it says really, I am fitting inertia rear seat belts to my Chevette hatch and need a pair of strengthening plates with a captive nuts as the panel to mount against is not strong enough. Any out there or no where I can get them. Cheers Mull


	Reply Quote

adrian sutton Part of things Posts: 595	Rear seat belts strengthening plate w captive nut adrian sutton @cfshagginwagon
	Apr 21, 2008 20:59:39 GMT Select Post Deselect Post Link to Post Back to Top
	3mm plate steel with a nut welded to it , go for around 5inch square or what ever you can fit into where you want to locate the seatbelts. the plate spreads the load , replaced mine on my range rover in the same manor.
	Www.mid-england-retrims.co.uk

	Reply Quote