|
|
|
Feb 12, 2008 11:14:51 GMT
|
|
Does anyone have any spare exhaust tube knocking around?
I need a straight bit about 18" long and around 2.25" - 2.5" diameter, and if anyones got them I could use a couple of mandrel bent right angle bends with an outside diameter of 2.25" (57mm?).
Preferably close to Oxford unless you're willing to post.
Cheers.
|
| |
|
|
Mr S
Posted a lot
10-4 Good buddy.
Posts: 2,654
|
|
Feb 12, 2008 12:51:01 GMT
|
I don't, but www.jetex.co.uk do mild and stainless pipe and mandrel bends.... Milner off-road do stainless stuff too (forget their website off the top of my head.) Cheers, Martin |
| |
Suzuki GSXR1000 K2
BMW R1150GS
BMW K1200RS
Chevy K5 Blazer
Chevy Suburban LT
Jaguar XKR
|
|
|
|
|
Feb 12, 2008 13:28:39 GMT
|
|
Jetex is an option - though they don't do 2.25, could get the straight bit from them.
Thanks for the heads up.
|
| |
|
|
gotee
Part of things
Posts: 72
|
|
Feb 12, 2008 16:47:14 GMT
|
|
I have some 2.25 90% bends and possible some straight pipe as well, I'm in northamptonshire so not that far away, bends are £10 each and pipe if i have it i will throw in free if you buy the bends.
|
| |
|
|
|
|
|
Feb 12, 2008 17:39:22 GMT
|
|
I've got a 620 ti centre section with a couple of right angle bends if you want it. dunno the diameter off the top of my head. Could be chopped up and made use of?
|
| |
Current cars:-
2001 P38 Range Rover 4.0 V8 (economical family run about)
1980 Mini Clubman estate (very much in a state!)rolling shell project
1976 Reliant Robin saloon
1998 kawasaki zzr 600 (the commuter)
|
|
|
|
|
Feb 12, 2008 17:57:50 GMT
|
|
Hmm, I'll give you a call later about that centre section, though for now just to get it on the road I may just put the puny randomly sized one back on as it is.
Thanks for the offer gotee, I'll let you know if I need them.
|
| |
|
|
|
|
|
Feb 12, 2008 21:49:14 GMT
|
|
Any motor factors that sell exhausts should have or be able to get straight pipes in various sizes (don't know about bends never asked) as the exhaust manufactures list it in their catalogues.
|
| |
|
|
|
|
WTD: Exhaust tubingBenzBoy
@benzboy
Club Retro Rides Member 7
|
Feb 13, 2008 18:57:42 GMT
|
I'm after some too. I've looked at Jetex - they seem to do most diameters. Not bad on price either.  |
| |
|
|
Mr S
Posted a lot
10-4 Good buddy.
Posts: 2,654
|
|
Feb 13, 2008 19:13:05 GMT
|
|
|
| |
Suzuki GSXR1000 K2
BMW R1150GS
BMW K1200RS
Chevy K5 Blazer
Chevy Suburban LT
Jaguar XKR
|
|
