purchased from somebody on here 
and its a cracker bit of research across the pond and here revealed it to be one of only 3 ever imported in to good old blighty ,its a special edition to commemorate Honda's return to f1, loaded with all the toys and they all work needs a wheel bearing on the front and 2 upper bushes ,bit o TLC on the rear arches (supplied with the panels)the engine is the b20a2 all alloy dohc 170bhp , it was lowered but to crashy for my tastes so Ive swapped the coil-overs for the ones on the prelude (much more comfortable for a old git :)some picssssss.......
as collected
brummmbrummmbrumm:)
first modification new rocker cover gasket and a quick go on the media blaster at work and a touch of tornado red
standard coil-over verses lowering springs
next the wheels very tatty and corroded so off with the tyres in the blaster denied all knowledge of the silver paint contaminating the media and a couple of cans of the Matt black 
before
after
Ive got a mugen four branch coming from the states a decat pipe to make and a bit of battery in the boot action to make room for a cold air intake ,Ive been told the cams from the pre vtec type r integra fit and should raise the pooowwweerrr nicely , more as it gets done
and its a cracker bit of research across the pond and here revealed it to be one of only 3 ever imported in to good old blighty ,its a special edition to commemorate Honda's return to f1, loaded with all the toys and they all work needs a wheel bearing on the front and 2 upper bushes ,bit o TLC on the rear arches (supplied with the panels)the engine is the b20a2 all alloy dohc 170bhp , it was lowered but to crashy for my tastes so Ive swapped the coil-overs for the ones on the prelude (much more comfortable for a old git :)some picssssss.......as collected
brummmbrummmbrumm:)
first modification new rocker cover gasket and a quick go on the media blaster at work and a touch of tornado red
standard coil-over verses lowering springs
next the wheels very tatty and corroded so off with the tyres in the blaster denied all knowledge of the silver paint contaminating the media
and a couple of cans of the Matt black 
before
after
Ive got a mugen four branch coming from the states a decat pipe to make and a bit of battery in the boot action to make room for a cold air intake ,Ive been told the cams from the pre vtec type r integra fit and should raise the pooowwweerrr nicely , more as it gets done
