Welcome Guest. Please Login or Register.

Clicking on eBay [or other affiliations] may result in referral commission being paid if a purchase is made.

PRO BEIGE 100E..............

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Feb 12, 2008 8:27:28 GMT Select Post Deselect Post Link to Post Back to Top
	Here is my 100e I bought awhile back, I was in two minds as to keep it or forward it on because really I was looking for a road going 100e, but after a little tinker was already getting involved more-so then intended. This is where I'm at Taken front and rear suspension off out of the way She is basically a bare shell now. Removed all the curse word old u/seal ect from the underbelly, front & rear end, boot wells, inner wings & front panel ect then treated to two coates of tetraseal. Have been clicking at various stages but still yet to upload from camera, still got to get my head round uploading pics!!! watch this space..................
	Last Edit: May 23, 2008 6:01:38 GMT by bazzil

	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Feb 12, 2008 8:33:08 GMT Select Post Deselect Post Link to Post Back to Top
	More pics............... ;D


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Feb 12, 2008 8:37:58 GMT Select Post Deselect Post Link to Post Back to Top
	and more..........................


	Reply Quote

stealthstylz Club Retro Rides Member Posts: 14,961 Club RR Member Number: 174	PRO BEIGE 100E..............stealthstylz @stealthstylz Club Retro Rides Member 174
	Feb 12, 2008 9:59:14 GMT Select Post Deselect Post Link to Post Back to Top
	That looks pretty solid will be a good project. Can somebody move this to the right area though? Matt


	Reply Quote

DerbyDan Posted a lot Posts: 1,809	PRO BEIGE 100E..............DerbyDan @derbydan
	Feb 12, 2008 12:49:21 GMT Select Post Deselect Post Link to Post Back to Top
	Yeah, looks great - really like 100es Looks like you've got the hang of uploading pics thats for sure This should really be in the reader rides section - unless you are making it onto a sofa or garden ornament ;D


	Reply Quote

jettadeluxe Guest	PRO BEIGE 100E..............jettadeluxe @GUEST
	Feb 14, 2008 20:29:45 GMT Select Post Deselect Post Link to Post Back to Top
	MODZ!!!!!!!!!!!! lol


	Reply Quote

wagoneer Posted a lot Posts: 2,289	PRO BEIGE 100E..............wagoneer @wagoneer
	Feb 14, 2008 22:09:39 GMT Select Post Deselect Post Link to Post Back to Top
	Very clean! It's great to see a 100E in progress, I had a stock one many years ago and loved it.
	Peugeot 307sw - Suzuki SV650S - MX5.

	Reply Quote

trg1984 Posted hell of a lot pitying fools since 1984 Posts: 6,503	PRO BEIGE 100E..............trg1984 @trg1984
	Feb 16, 2008 20:03:00 GMT Select Post Deselect Post Link to Post Back to Top
	what a brilliant colour, please please please keep the beige tone!!!


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Mar 3, 2008 0:05:51 GMT Select Post Deselect Post Link to Post Back to Top
	Been awhile here's some more pics guys..............


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Mar 3, 2008 0:29:53 GMT Select Post Deselect Post Link to Post Back to Top
	Yes I've settled for a p100 2.0 pinto engine & 5spd box, for now anyways!!! Hopeing to get abit of time round the old girl this week.........weather permitting!!! Thumps up


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Mar 3, 2008 21:43:16 GMT Select Post Deselect Post Link to Post Back to Top
	AS seen in the last pics the rear 105e axle is on with -2" blocks & decambered springs, I went for the gaz adjustable shocks. Also you can see the modified escort crossmember with s/rack & a/r bar is now in place along with the legs ect Been out on the old girl today, filled all unwanted holes in engine bay, built the engine back up. It is time consuming wire brushing every nut, bolt & washer as I have done throughout the build, I have used nylock nuts whenever poss some new bolts & split washers. INFACT everything thats going back on is either new, wirebrushed cleaned & painted or polished (alloy ect).


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Mar 3, 2008 21:58:29 GMT Select Post Deselect Post Link to Post Back to Top



	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Mar 4, 2008 21:50:08 GMT Select Post Deselect Post Link to Post Back to Top
	Managed to get some paint around engine bay today......... below Thought I'd try the old pinto for size........(as you do!)


	Reply Quote

festerfly Part of things Posts: 702	PRO BEIGE 100E..............festerfly @festerfly
	Mar 5, 2008 9:35:43 GMT Select Post Deselect Post Link to Post Back to Top
	very smart. Makes me miss my old 100E.. It was a 2 door fitted with a 107E bulkhead for clearance. Did you modify the crossmember? how difficult was it, are there many mods to it as it looks like a nicely fitting unit.
	I'm not saying I'm Batman, but have you ever seen me and Batman in the same room together?......... And no, I'm not Ben Affleck!

	Reply Quote

Deleted Posts: 0	PRO BEIGE 100E..............Deleted @Deleted
	Mar 5, 2008 18:41:11 GMT Select Post Deselect Post Link to Post Back to Top
	thats amazing !! that pinto looks factory fit !! when I was a mechanic years ago we used to have hell stopping those pressed steel covers leaking, most of the time it was due to people overtightening the bolts and twisting the lip, always worth checking its nice and flat and the bolts havent pulled into the lip when you have the chance !! amazingly clean car too !!!!


	Reply Quote

pompeypaul Part of things Posts: 258	PRO BEIGE 100E..............pompeypaul @pompeypaul
	Mar 16, 2008 10:37:52 GMT Select Post Deselect Post Link to Post Back to Top
	love 100e's, and this ones looking real nice.........keep up the updates making think of getting one
	loving the dub

	Reply Quote

stealthstylz Club Retro Rides Member Posts: 14,961 Club RR Member Number: 174	PRO BEIGE 100E..............stealthstylz @stealthstylz Club Retro Rides Member 174
	Mar 16, 2008 11:19:19 GMT Select Post Deselect Post Link to Post Back to Top
	I think Pintos are the best choice for 100es as a "build" motor. Once you've made one fit any 4 cylinder engine and most v6/v8s will go in. Matt


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	Mar 25, 2008 0:44:29 GMT Select Post Deselect Post Link to Post Back to Top
	Hi guys just a wee update due to the wet conditions, no pun intended honest!!! can only get bits & pieces done at mo. Decided to underseal behind the light bezels...


	Reply Quote

bazzil Part of things Posts: 83	PRO BEIGE 100E..............bazzil @bazzil
	May 8, 2008 22:30:03 GMT Select Post Deselect Post Link to Post Back to Top
	Hi all, An update of how things are progressing IMG]http://i31.photobucket.com/albums/c355/mehatmecoat/100e%201/100e%202/100e%203/100e%204/100e%205/22032008486-1.jpg[/IMG] more to follow


	Reply Quote

missantix Part of things Posts: 98	PRO BEIGE 100E..............missantix @missantix
	May 19, 2008 17:24:52 GMT Select Post Deselect Post Link to Post Back to Top
	I love 100E's and this one looks real nice


	Reply Quote

Retro Rides Privacy Statement