|
|
|
I finally got round to doing this now my project is past three quarters of the way through. heres how she looked when I bought her 18 months ago ![](http://i17.tinypic.com/7yml1kz.jpg) and its taken me months just to get the bits to do this so not a lot happened in the first year just some tinkering with wheels wings (replacing) welding on sills arches and so on. ![](http://i8.tinypic.com/82dzho9.jpg) thats my HS axle before it was cleaned. ![](http://i12.tinypic.com/6ppmd1g.jpg) and thats it after I had it blasted and cleaned
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
|
sorry pics are big!! and ill space em out more next time lol iv done loads more so if you have any questions or requests for specs let me know but itll be similar to the other guys with chevettes with redtops, as iv tried to make it as easy as i can for my self by copying other people.
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
topi
Posted a lot
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
It's a race car officer, I swear!
Posts: 1,039
|
|
|
Good work man! Good to see you're preparing it properly before getting excited with fast parts ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|
|
|
|
|
|
cheers!! i nearly chucked it together, but i thought ill take my time. its cost me way more than i thought it would but iv sorted the brakes, exhaust, axle, turrets now so not a lot left to do
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
![](http://i4.tinypic.com/80pdrgx.jpg) i finally got the manifold on the other week after i took a grnder to the chassis. ![](http://i17.tinypic.com/8a51qg0.jpg) and i got the brakes sorted a month ago they should get me stoppin lol ![](http://i7.tinypic.com/6jnkach.jpg) thats an oil cooler from a vauxhall frontera i got it for a tenner ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
curse word dude! - tonnes of graft gone into that.. looking damn well.. nice.. choice parts.
|
|
|
|
|
|
|
a little project i had the other night was putting a gas strut on the bonnet so i could chuck away that stupis bonnet stay because it scratches the care every time you put it away ![](http://i6.tinypic.com/6qcn6fm.jpg) ![](http://i14.tinypic.com/6l2zb52.jpg) and heres the rear can i made. i cut a large one in half than welded it back up. its surprising what u can get for free at ATS if you ask nicely ;D ![](http://i12.tinypic.com/8bgzw2e.jpg)
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
cheers peester the oil cooler is a perfect fit really lucky i bought it just incase it went in. don't forget it has taken over a year tho! so iv not been that busy. hoping to get it done for the new year but I'm not sure anymore.
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
i thought id do a parts spec list. here goes lol ENGINE xe engine from a calibra( gelpack type) modifyed bulkhead to make it fit.
GEARBOX manta 5 speed
CLUTCH standard flywheel with late carlton 2ltr friction plate.
CHASSIS kadett saloon turrets, new sills amn winds
SUSPENSION spax adjustables from a manta, unknown springs upfront (believed to be 190lbs) standard rear springs,
AXLE chevette HS axle without lsd,fully rebuilt and resprayed awaiting disc conversion asap
BRAKES Wilwood 4 pots (dynalite i think) and siera calipers for the rear
SEATS nove gsi seats i think
EXHAUST sbd clubman manifold and home made 60mm straight through exhaust system
FUEL TANK converted to take calibra pick up pipe
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
v8chevette
Posted a lot
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
PROUD TO BE BEIGE!!
Posts: 1,109
|
|
|
Excellent work!!!!!!!!!!!!!
|
|
|
|
bazzateer
Posted a lot
![*](//storage.proboards.com/forum/images/stars/star.png) ![*](//storage.proboards.com/forum/images/stars/star.png)
Imping along sans Vogue
Posts: 3,653
|
|
|
And above all else, it's a Chev(y)ette ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|
1968 Singer Chamois Sport 1972 Sunbeam Imp Sport 1976 Datsun 260Z 2+2 1998 Peugeot Boxer Pilote motorhome 2003 Rover 75 1.8 Club SE (daily) 2006 MG ZT 190+ (another daily) 2007 BMW 530d Touring M Sport (tow car)
|
|
|
|
|
heres some more pics from a couple of months ago ![](http://i16.tinypic.com/8a0toa9.jpg) this is my pedal box. ![](http://i2.tinypic.com/71zis7p.jpg) and thats the mod to the bulkhead to allow the pedals to go back to their original height ![](http://i8.tinypic.com/6s6bhoh.jpg) thats the hole befor the box went in ![](http://i5.tinypic.com/6kfosie.jpg) there is my home made door cards and alu handles. ![](http://i7.tinypic.com/6nrk9jl.jpg)
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
|
Fantastic! this is how I dream my project will go.. my imagination says "Yes! Yes!" my logic says "no no" ;D
Top jobbing sir!
|
|
Faster. Faster. Until the thrill of speed overcomes the fear of death.
|
|
|
|
Dec 10, 2007 10:54:53 GMT
|
this is the interior as it is now. sprayed up I'm black but i wish i didnt do it so soon because I'm scratching and chipping the paint all the time ![](http://i18.tinypic.com/721eecg.jpg)
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
Dec 10, 2007 19:36:17 GMT
|
last week i made my exhaust system from scraps i got out of a skip at my local ATS ;D ![](http://i6.tinypic.com/731qqzr.jpg) i painted the manifold at the same time aswell. ![](http://i9.tinypic.com/8a2pg9d.jpg) although u cant tell from my crappy pictures iv got these wheels on the car. ![](http://i14.tinypic.com/730bkfb.jpg) a few weeks ago i had what i thought was a good idea ;D I'm goin to put my air filter on the outside of the panel, sp i avoid sucking in hot air. ![](http://i2.tinypic.com/6ue8bdg.jpg)
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
Dec 14, 2007 20:59:20 GMT
|
i finally welded the chassis where i grinded a couple of inches out for the exhaust manifold. pics taken today but left my camera over the shed lol
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
Dec 14, 2007 21:07:53 GMT
|
heres a pic of the radiator infront of the engine. its tight ![:P](//storage.proboards.com/forum/images/smiley/tongue.png) ![](http://i4.tinypic.com/739mhdz.jpg) people told me it was easy to fit it in...fibbers!
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
Dec 14, 2007 21:10:00 GMT
|
now i can finally put the welder away ;D it feels good!! now I'm sanding filler and getting the shed ready for spraying in the next few days.
|
|
if we don't come down hard on these clowns we'll be up to our balls in jugglers!
|
|
|
|
Dec 14, 2007 21:14:35 GMT
|
thats a lot of work for a shuvitt lol keep up the good work. have you got aney idears for the paint yet or are you leaving it as is? i wanted to do the same transplant on mine but its to nice to do it to ill have to get a second one. keep posting.
|
|
|
|
|