Welcome Guest. Please Login or Register.

Clicking on eBay [or other affiliations] may result in referral commission being paid if a purchase is made.

47.5" Atlas Axle. TKO600 /T5 wanted

« Prev
1
Next »

Quarterless Part of things Posts: 104	47.5" Atlas Axle. TKO600 /T5 wanted Quarterless @quarterless
	May 13, 2007 13:12:50 GMT Select Post Deselect Post Link to Post Back to Top
	Pair of New Mk1 escort pattern wings £300 Mk1 escort pattern wings carefully removed from my car, lips have been rolled inorder to fit large wheels and there is a small shopping trolley dent in one. £150 Fibreglass bonnet needs slight 1" repair to either side as postman ratchet strapped it into van £45 New Mk1 Escort pattern front panel £50 T5 to XE bellhousing for 7 degree or straight mounting £200 MBE 967ID with XE loom £350 45's with XE manifold, new filters, mount kit, rubber bush kit, weber linkage. £450. needs 2 spindal nuts to make complete. T5 + mount sold as needing a rebuild as I don't know condition £100 (provisionally sold.) XE Engine just had new head gasket, head bolts and oil filter fitted by www.hellierperformance.com . £350. Carbs + ignition for sale separately above. 2.8i capri standard half shafts £20 47.5" Atlas, 3.75 diff, LSD, Two piece shafts, 24 spline side gears, 4 link brackets, p100 rear cover, spreader plates, Heavy duty clutch pack. £2000 270bhp XE currently being built will be for sale in about a week.
	Last Edit: Jun 18, 2007 8:55:57 GMT by Quarterless 1968 Volvo Amazon Estate 1800cc: retrorides.proboards.com/index.cgi?action=display&board=readersrides&thread=37437&page=1

	Reply

Quarterless Part of things Posts: 104	47.5" Atlas Axle. TKO600 /T5 wanted Quarterless @quarterless
	May 14, 2007 21:21:31 GMT Select Post Deselect Post Link to Post Back to Top
	Now on Ebay
	1968 Volvo Amazon Estate 1800cc: retrorides.proboards.com/index.cgi?action=display&board=readersrides&thread=37437&page=1

	Reply

Quarterless Part of things Posts: 104	47.5" Atlas Axle. TKO600 /T5 wanted Quarterless @quarterless
	May 22, 2007 18:18:20 GMT Select Post Deselect Post Link to Post Back to Top
	These items sold:Pair of New Mk1 escort pattern wings Fibreglass bonnet needs slight 1" repair to either side as postman ratchet strapped it into van New Mk1 Escort pattern front panel MBE 967ID with XE loom 45's with XE manifold, new filters, mount kit, rubber bush kit, weber linkage. T5 + mount sold as needing a rebuild as I don't know condition. Still for sale: Mk1 escort pattern wings carefully removed from my car, lips have been rolled inorder to fit large wheels and there is a small shopping trolley dent in one. £100 XE Engine just had new head gasket, head bolts and oil filter fitted by www.hellierperformance.com . £300. 2.8i capri standard half shafts £20 47.5" Atlas axle, LSD. Reconditioned unit, based on Capri 2.8i Special item. Ultra-sonically cleaned and crack-tested housing. 45/45 ramp angles. All clutch plates/thrust washers etc are brand new. Two piece GP1 halfshaft kit (Shafts are handed left and right – the LH shaft having a left-hand thread to prevent the nut coming undone) manufactured specially for Fostek designed with ultimate strength and reliability in mind, 4 link brackets on shafts but left to be welded into personal position, heavy duty clutch pack, Large spline (18 tooth, ZF spline) as fitted to GP4 spec limted slip diffs, P100 rear cover. “Heavy-duty” – made in thicker gauge steel than the original Capri item. Fitted with brazed-in breather pipe and clip for brake pipe with new gasket. Spreader plates. Bolt-on mod, which spreads the load from the cover bolts and prevents the gasket from moving around/squeezing out and leaking oil… Laser cut in 5mm steel and zinc plated. 3.75 ratio. Built by Fostek and unused.£1900 270bhp XE £6500
	1968 Volvo Amazon Estate 1800cc: retrorides.proboards.com/index.cgi?action=display&board=readersrides&thread=37437&page=1

	Reply

2000GLS Part of things Posts: 353	47.5" Atlas Axle. TKO600 /T5 wanted 2000GLS @retrocarclub
	May 23, 2007 11:44:21 GMT Select Post Deselect Post Link to Post Back to Top
	don't suppose you have any Manta 1.8 engine mounts do you?


	Reply

Quarterless Part of things Posts: 104	47.5" Atlas Axle. TKO600 /T5 wanted Quarterless @quarterless
	May 27, 2007 12:35:27 GMT Select Post Deselect Post Link to Post Back to Top
	Nope sorry.
	1968 Volvo Amazon Estate 1800cc: retrorides.proboards.com/index.cgi?action=display&board=readersrides&thread=37437&page=1

	Reply

Quarterless Part of things Posts: 104	47.5" Atlas Axle. TKO600 /T5 wanted Quarterless @quarterless
	Jun 18, 2007 8:53:43 GMT Select Post Deselect Post Link to Post Back to Top
	These items still for sale: Now lower price. 2.8i capri standard half shafts £20 47.5" Atlas axle, LSD. Reconditioned unit, based on Capri 2.8i Special item. Ultra-sonically cleaned and crack-tested housing. 45/45 ramp angles. All clutch plates/thrust washers etc are brand new. Two piece GP1 halfshaft kit (Shafts are handed left and right – the LH shaft having a left-hand thread to prevent the nut coming undone) manufactured specially for Fostek designed with ultimate strength and reliability in mind, 4 link brackets on shafts but left to be welded into personal position, heavy duty clutch pack, Large spline (18 tooth, ZF spline) as fitted to GP4 spec limted slip diffs, P100 rear cover. “Heavy-duty” – made in thicker gauge steel than the original Capri item. Fitted with brazed-in breather pipe and clip for brake pipe with new gasket. Spreader plates. Bolt-on mod, which spreads the load from the cover bolts and prevents the gasket from moving around/squeezing out and leaking oil… Laser cut in 5mm steel and zinc plated. 3.75 ratio. Built by Fostek and unused.£1850
	Last Edit: Jun 18, 2007 8:54:55 GMT by Quarterless 1968 Volvo Amazon Estate 1800cc: retrorides.proboards.com/index.cgi?action=display&board=readersrides&thread=37437&page=1

	Reply

Retro Rides Privacy Statement