WTD: K-series 1.4 piston

Dorset_Clive Part of things Posts: 695	WTD: K-series 1.4 piston Dorset_Clive @cochapman
	Jul 31, 2006 14:28:32 GMT Select Post Deselect Post Link to Post Back to Top
	Does anybody have a piston (and rings) from a 1.4 K-series, the later ("wet") engine - the one with the raised "land" across the majority of the piston top and the six "half moon" indents for the valves (the older design had two parallel groves towards the edges of the piston and no indents). Just for info, they're 74.4mm dia. I'm not worried about the state of the conrod as I'm going to press it on to the existing CR. Beer tokens waiting!! Thanks very much.


	Reply

planty Part of things Posts: 154	WTD: K-series 1.4 piston planty @planty
	Jul 31, 2006 16:23:19 GMT Select Post Deselect Post Link to Post Back to Top
	i have a complete 1400 16v K out of a late metro GTi (MPi engine but it is missing the manifolds etc...) sitting on the drive that you can have if you can collect it.... i'm in Cannock - Staffordshire.
	rustingdeathtrap said: but then that was a peugeot and they're generally made of cheese anyway ;D

	Reply

Dorset_Clive Part of things Posts: 695	WTD: K-series 1.4 piston Dorset_Clive @cochapman
	Aug 1, 2006 15:01:29 GMT Select Post Deselect Post Link to Post Back to Top
	Thanks, it is a shame it is so far away, it's going to cost me £50 to come and get it :-( I'll have a dig around and see if I can find a courier. Or is anybody coming past that is willing to carry it for some beer tokens?


	Reply