Workshop clearout time! My brother James has a two-door 100E shell which needs to go.
It has doors, bootlid and bonnet and the standard rear axle. It certainly seems pretty solid. At the front the inner wings have been cut out, and someone's fitted an HC Viva front x-member / suspension set-up. The bulkhead's also been modified (recessed) for a different engine, but we don't know what. It wasn't a pinto though!
Would make an excellent pro-streeter... ;D
James also has a load of 100E parts available.
I think the shell is about £100 ono, feel free to post / email / PM any questions. I'm going to take some photos later!
It has doors, bootlid and bonnet and the standard rear axle. It certainly seems pretty solid. At the front the inner wings have been cut out, and someone's fitted an HC Viva front x-member / suspension set-up. The bulkhead's also been modified (recessed) for a different engine, but we don't know what. It wasn't a pinto though!
Would make an excellent pro-streeter... ;D
James also has a load of 100E parts available.
I think the shell is about £100 ono, feel free to post / email / PM any questions. I'm going to take some photos later!