The passenger pop up light on my car wouldnt go down I got advise from the Scimita website and took the motor off. Sure enough the contact they said would be full of curse word was indeed full of curse word so I cleaned it all thoroughly and sandpapered the contacts. I then realised Id bent the copper strip skyward and it no longer restd on its contact when it needs to. When I push the contact down the motor whizzes but when I don't touch it nothing happens at all
any ideas on how I can succesfully ben the copper strip down whilst keeping the 'springyness' thats needed in order for it to go up and down when its pushed? Or have I just made it a lot worse
I hate electrics soooooo friggin much ![::)](//storage.proboards.com/forum/images/smiley/eyesroll.png)
![:(](http://storage.proboards.com/forum/images/smiley/sad.png)
![::)](http://storage.proboards.com/forum/images/smiley/eyesroll.png)
![::)](http://storage.proboards.com/forum/images/smiley/eyesroll.png)