After some getting quotes from a few companies for a suitable material being 'ASA' or an ABS style material which has good mechanical properties and a decent thermal resistance.
Prices are below, and please understand I've had quotes north of £1200 for a pair from some of the companies i've had quote for the parts. so finding a company that did it for a more reasonable price took some work.
Single side (RH or LH) - £215 each
Full set (RH and LH) Regular price - £425 per pair
OMOC members - see the forums for discounted price.
Printed in ASA - ABS style material which should be high strength and good thermal resistance (softening temp of 98C)
Price covers P&P within the UK - recorded delivery with tracking number.
If shipping internationally - P&P is not covered will be quoted in addition to the price.Do check on import charges as these will be applied at the border and I will not cover these.
Lead time is 2 weeks including printing and shipping, I'll try and dispatch these on a 48hr delivery service within UK.
I'll be doing group orders of 3 sets at a time - First come first serve basis.
20% deposit up front is required to get a slot - Non refundable if order is canceled after printing has commenced.
Single headlight - £43
Paired set of headlight - £85
An email with an invoice will be provided for with remaining balance
Remaining balance to be paid once I have parts from the printers ready to ship out.
Orders will be placed once all slots are placed.
Paypal payment preferred as to protect both parties - details will be pmed / on the invoice to all those interested and money held there until I have full payment and I have dispatched the parts.
I'll update people via PM whom have paid deposits on progress.
The parts will come freshly printed and will have a rough surface finish to them, this is a result of the printing process, but means a good quality high build primer for plastics can be applied , sanded and then painted - of note the ASA (ABS style) does have an material softening limit of 98C before softening and could distort, so bear this in mind if you plan to bake these in a paint booth.
They are un-drilled but do have the bosses for drilling both location holes for the headlights as part of the print but no mounting location - this is up to customers.
Pictures below are of the models and the likely finished look, of note that part was done for Car SOS.
Prices are below, and please understand I've had quotes north of £1200 for a pair from some of the companies i've had quote for the parts. so finding a company that did it for a more reasonable price took some work.
Single side (RH or LH) - £215 each
Full set (RH and LH) Regular price - £425 per pair
OMOC members - see the forums for discounted price.
Printed in ASA - ABS style material which should be high strength and good thermal resistance (softening temp of 98C)
Price covers P&P within the UK - recorded delivery with tracking number.
If shipping internationally - P&P is not covered will be quoted in addition to the price.Do check on import charges as these will be applied at the border and I will not cover these.
Lead time is 2 weeks including printing and shipping, I'll try and dispatch these on a 48hr delivery service within UK.
I'll be doing group orders of 3 sets at a time - First come first serve basis.
20% deposit up front is required to get a slot - Non refundable if order is canceled after printing has commenced.
Single headlight - £43
Paired set of headlight - £85
An email with an invoice will be provided for with remaining balance
Remaining balance to be paid once I have parts from the printers ready to ship out.
Orders will be placed once all slots are placed.
Paypal payment preferred as to protect both parties - details will be pmed / on the invoice to all those interested and money held there until I have full payment and I have dispatched the parts.
I'll update people via PM whom have paid deposits on progress.
The parts will come freshly printed and will have a rough surface finish to them, this is a result of the printing process, but means a good quality high build primer for plastics can be applied , sanded and then painted - of note the ASA (ABS style) does have an material softening limit of 98C before softening and could distort, so bear this in mind if you plan to bake these in a paint booth.
They are un-drilled but do have the bosses for drilling both location holes for the headlights as part of the print but no mounting location - this is up to customers.
Pictures below are of the models and the likely finished look, of note that part was done for Car SOS.
