I appear to have discovered the portal to where the 10mm sockets go…
In a box of other stuff that I have found myself having to dispose of, I found a cache of new 1/2” drive sockets.
They aren’t the best quality, but they’re the kind of “useable” ones that I would happily have in my breakdown kit, and are single hex, so quite good for rounded fixings. Unbranded other than size and “Taiwan”.
there are 21 of the 10mm ones, 9 of the 12mm, 10 of 17mm and 10 of 19mm.
I also have about thirty 5” long 1/2” drive extensions.
There’s also two Draper Expert 14mm spark plug sockets. In 3/8” drive.
Chrome a little marked on some from storage.
One pound each, plus whatever it costs to get them to you.
Finally, I have nine 3/4” AF (19mm equivalent) Gedore chrome vanadium combination spanners. These are £2 each, again plus whatever the postage is.
First come, first served. Happy to sell the lot in one go if you want to make an offer.
In a box of other stuff that I have found myself having to dispose of, I found a cache of new 1/2” drive sockets.
They aren’t the best quality, but they’re the kind of “useable” ones that I would happily have in my breakdown kit, and are single hex, so quite good for rounded fixings. Unbranded other than size and “Taiwan”.
there are 21 of the 10mm ones, 9 of the 12mm, 10 of 17mm and 10 of 19mm.
I also have about thirty 5” long 1/2” drive extensions.
There’s also two Draper Expert 14mm spark plug sockets. In 3/8” drive.
Chrome a little marked on some from storage.
One pound each, plus whatever it costs to get them to you.
Finally, I have nine 3/4” AF (19mm equivalent) Gedore chrome vanadium combination spanners. These are £2 each, again plus whatever the postage is.
First come, first served. Happy to sell the lot in one go if you want to make an offer.
