Honda D series engine dimensions

grumpybadger North East Posts: 1,159	Honda D series engine dimensions grumpybadger @grumpybadger
	Mar 28, 2024 16:57:53 GMT Select Post Deselect Post Link to Post Back to Top
	Does anyone have a D series powered honda or a D series engine lying around that they could take a couple if measurements from? I'm just researching a swap but have very limited space to play with. I need to know the overall length from the gearbox mounting face to the front of the pulleys Overall height and centre of cam cover to the edge of the throttle body would be useful but less important. Thanks


	Reply Quote

twincammy Part of things Posts: 866	Honda D series engine dimensions twincammy @twincammy
	Apr 7, 2024 19:29:38 GMT Select Post Deselect Post Link to Post Back to Top
	i have a D16Z6 in the garage- box face to pulley is pretty much 500mm overall height is 580mm that little area under the sump is 190mm from box face overall width from mani face to clear intake is about 500mm too. hope that helps.
	@ CRX_IN_SCOTLAND

	grumpybadger likes this Reply Quote

grumpybadger North East Posts: 1,159	Honda D series engine dimensions grumpybadger @grumpybadger
	Apr 8, 2024 7:39:22 GMT Select Post Deselect Post Link to Post Back to Top
	Thanks for that. By box face do you mean to the cover face? Ie, excluding the pulley Edit I woke up and realised exactly what you mean. What a div I am.
	Last Edit: Apr 9, 2024 18:49:14 GMT by grumpybadger

	Reply Quote