up for sale now I've got some PLS Hockenheim 3 piece splits which are quite rare in 8J with 5 back spacing and 7J 4.5 back spacing x 13", with PCD 4x95.25 or 4x3 3/4" to fit Triumph, Rover, Lotus ect. These are very very high quality french made racing wheels, and they weigh absolutely nothing!
Was planning on putting them on my mini but I'm running 101.6 pcd so they would fit the Watson frames with mg pcd..... Was going to get them redrilled to suit but going down a different route
Wheels look great bar some little marks pictures on the barrels and could do with with a good polish.
Quite a few of the bolts are loose so would need the seal checked but this was going to be done if I got them redrilled
Only came across one mini with these wheels on and have attached it for info
any questions I'm happy to answer
looking for 650 ono
happy to put on a pallet if buyer arranges courier
location aberdeen
Was planning on putting them on my mini but I'm running 101.6 pcd so they would fit the Watson frames with mg pcd..... Was going to get them redrilled to suit but going down a different route
Wheels look great bar some little marks pictures on the barrels and could do with with a good polish.
Quite a few of the bolts are loose so would need the seal checked but this was going to be done if I got them redrilled
Only came across one mini with these wheels on and have attached it for info
any questions I'm happy to answer
looking for 650 ono
happy to put on a pallet if buyer arranges courier
location aberdeen
