I have my Rover 3.9 V8 powered Scimitar up for sale on eBay - HERE - no reserve auction. It's had a HUGE amount of work and money put into it and is 90% finished - running, driving, painted, assembled..... The listing gives all the details.
In summary, full body off restoration - chassis stripped bare, repaired, refinished and rebuilt with all new suspension, uprated brakes, hard lines, rebuilt rear axle etc. Fitted with high compression 3.9L Rover V8 that has been fully rebuilt, bearings, rings, camshaft, followers, skimmed and rebuilt heads, all new ancillaries.... the whole works. Running 4 barrel Edelbrock on Offenhauser manifold.
Body stripped bare to gel coat, repairs and stainless upgrades to A -pillars, sills, integral roll hoop, plus subtle track inspired mods - bonnet bulge, various mouldings shaved, smoothed and cleaned up... then fully prepped and primed in epoxy, with 2 pack top coat. Looks amazing! All new lights front and back; carbon effect mirrors, light surrounds and grilles; rare, lightweight GRP bumpers and spoiler; Lexan side windows etc. Minimal interior along race car theme.
If you wanted to replicate this you'd be looking at the thick end of £20k to cover all the work, parts, materials and body prep....
It's a running, driving project needing a little bit more work to finish before it's 100% awesome !!
In summary, full body off restoration - chassis stripped bare, repaired, refinished and rebuilt with all new suspension, uprated brakes, hard lines, rebuilt rear axle etc. Fitted with high compression 3.9L Rover V8 that has been fully rebuilt, bearings, rings, camshaft, followers, skimmed and rebuilt heads, all new ancillaries.... the whole works. Running 4 barrel Edelbrock on Offenhauser manifold.
Body stripped bare to gel coat, repairs and stainless upgrades to A -pillars, sills, integral roll hoop, plus subtle track inspired mods - bonnet bulge, various mouldings shaved, smoothed and cleaned up... then fully prepped and primed in epoxy, with 2 pack top coat. Looks amazing! All new lights front and back; carbon effect mirrors, light surrounds and grilles; rare, lightweight GRP bumpers and spoiler; Lexan side windows etc. Minimal interior along race car theme.
If you wanted to replicate this you'd be looking at the thick end of £20k to cover all the work, parts, materials and body prep....
It's a running, driving project needing a little bit more work to finish before it's 100% awesome !!