|
|
|
Sept 28, 2022 12:48:08 GMT
|
|
Hi, anyone on here running a Rover 100 Metro on 15" MGF/TF alloys - if so what tyre siz are you running on to avoid wheels arch rubbing etc ?
Thanks !!
|
| |
|
|
|
|
|
Sept 29, 2022 20:44:18 GMT
|
|
I don't know if you could get away with it tbh. I've got 14s with low profile tyres and the arches look pretty full...
|
| |
|
|
|
|
|
|
|
www.willtheyfit.com/If you can find out the offsets of both wheels, plumb the numbers into this site and it'll give you a visual and numerical representation of the changes in width, diameter and whether it's more pokey-outy or not. Armed with that knowledge, you should be able to measure off the existing wheels and get a vague idea. For the fronts it's best to turn them fully one way and check you're not going to be catching chassis rails or arches at full lock. Give plenty of clearance to account for the tops of the wheels moving inwards at full bump. Sometimes a surprisingly large combination just 'works' and other times a smaller combination doesn't.
|
| |
|
|
