After an early (pre 95 before bits changed?) Mk1 mx5 1.8l engine
Not too fussed on condition providing its not siezed or has a hole in the block planning to rebuild it prior to it going in the car.
Also interested in any bits people have lying around for the engine also, mainly gasket sets, arp studs, uprated pistons or rods etc.
Cheers
Not too fussed on condition providing its not siezed or has a hole in the block planning to rebuild it prior to it going in the car.
Also interested in any bits people have lying around for the engine also, mainly gasket sets, arp studs, uprated pistons or rods etc.
Cheers