|
|
|
Dec 27, 2019 16:32:57 GMT
|
|
|
| |
Bicycle x1
Alfa Giulietta (now wife's)
Alfa 156
BMW 630i
Honda rc36
|
|
scimjim
Club Retro Rides Member
Posts: 1,503
Club RR Member Number: 8
|
|
Dec 27, 2019 20:21:52 GMT
|
|
Used them for years on aircraft for expedient/battle damage repairs - not sure if there’s different quality types but they work well if shrunk properly.
|
| |
|
|
|
|
|
Dec 27, 2019 20:22:24 GMT
|
|
Used these before.Found it best too warm up the twisted wires before fitting in the sleeve as the heat shrink would burn before getting the solder hot enough to join the wires properly.Prefer using solder and standard glued heat shrink.
|
| |
|
|
|
|
|
Dec 27, 2019 23:10:49 GMT
|
|
when i did the wiring loom for my microsuqirt i looked into these, and everyone on the rally forum said to use the crimp ones that have that heat shrink on them. that is if you have a good crimp tool...
|
| |
|
|
ChasR
RR Helper
motivation
Posts: 10,201
Club RR Member Number: 170
|
|
|
|
when i did the wiring loom for my microsuqirt i looked into these, and everyone on the rally forum said to use the crimp ones that have that heat shrink on them. that is if you have a good crimp tool... And a good crimp. IMHO, the insulated crimps are the work of the devil. Get a decent set from a good electrical outlet and there is a difference despite them looking the same. I went from electrics that worked via telepathy with connectors falling off (including on cars I bought with them fitted) to something that works fine. Better still, get the ones that 'wrap' and dig into the cable and put your own factory looking sheath/insulation on top. |
| |
|
|
braaap
Posted a lot
Posts: 2,618
|
|
Dec 28, 2019 12:35:23 GMT
|
Better still, get the ones that 'wrap' and dig into the cable and put your own factory looking sheath/insulation on top. Have you got a pic (or link) of what you mean, please? |
| |
|
|
ChasR
RR Helper
motivation
Posts: 10,201
Club RR Member Number: 170
|
|
|
|
Better still, get the ones that 'wrap' and dig into the cable and put your own factory looking sheath/insulation on top. Have you got a pic (or link) of what you mean, please?   These are what I used on the Merc  . |
| |
|
|
.