|
|
|
|
|
|
Damn. Living the dream, I can only hope my mini turns out like any of yours lol.
What's the paint you used for the block and rocker? I'm trying to make mine look a bit more period as it's the 'newest' one I've ever had being an MPi, that said, it's the newest I've had but also the one with the most rot. Needed new subframes, whole front end, both floors, battery box, valances and scuttle. I bought as many heritage panels as MiniSpeed had at the time and it was eye-watering.
|
| |
1994 S1 106 Rallyé
1996 Mini Cooper 1.3 MPI (Rust bucket, currently in for surgery/resto)
2003 Renaultsport Clio 172 (Daily beater)
|
|
|
|
|
|
|
|
|
|
Thanks keeping it simple is the key..the paint is standard BMC green engine paint most mini suppliers sell it in aerosol or brush on..yes panels are not cheap..repros can work in certain areas but its always best to pay for the real deal..
|
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
|
I'm intrigued, what's that lurking in the 3rd picture with your newly cleaned engine?
|
| |
Why fit in, when you were born to stand out? Dr Seuss
|
|
|
|
|
|
|
I'm intrigued, what's that lurking in the 3rd picture with your newly cleaned engine? Yes that A series would be a little under powered to move that.
Come on spill the beans?
|
| |
|
|
|
|
|
|
|
Well..that belongs to my friend who owns the garage who also happens to be my neighbour..I met him when i first left school at a restoration company we worked for and have been good friends ever since as we share the same passion in turning out sharp restorations with a bit of engineering thrown in..We both work in the fabrication/engineering world which is very useful when doing these types of builds..The truck is a 1952 chevy 3100..What you carnt see in the picture is 2 years and lots of hurdles to get over which at first seemed to never end and lots of head scratching..All of which have been dealt with and its down to a few small details before it can be taken apart to paint and prep everything..The clever part is all underneath ..all of the suspension/brakes engine/ gearbox have been grafted into the chassis of the truck..the donor vehicle being a Audi 4.2 V8 Quattro 4WD RS4/6...Its planned to be used as a daily so will have the best of both worlds..looking cool and munch the miles with modern reliability and plenty of power .. This was a early pic taken with the basic running gear in place..  Untitled by |
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
I'm intrigued, what's that lurking in the 3rd picture with your newly cleaned engine? Yes that A series would be a little under powered to move that.
Come on spill the beans?
|
| |
Last Edit: May 5, 2019 13:40:33 GMT by hudson66
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
..carbs although clean just lacked in hard to get at areas..so i decided to completely strip and get all the linkages/ screws/brackets plated...i also faced adding a couple of trumpets and make them..so after a initial moch up ended up with these..  Untitled by  Untitled by And together..  Untitled by |
| |
Sqeaky Deak Classic Mini Van..
|
|
teaboy
Posted a lot
Make tea, not war.
Posts: 2,125
|
|
|
|
|
They look really cool but I think those tea strainer style filters kill performance.
|
| |
|
|
|
|
|
|
|
Well..that belongs to my friend who owns the garage who also happens to be my neighbour..I met him when i first left school at a restoration company we worked for and have been good friends ever since as we share the same passion in turning out sharp restorations with a bit of engineering thrown in..We both work in the fabrication/engineering world which is very useful when doing these types of builds..The truck is a 1952 chevy 3100..What you carnt see in the picture is 2 years and lots of hurdles to get over which at first seemed to never end and lots of head scratching..All of which have been dealt with and its down to a few small details before it can be taken apart to paint and prep everything..The clever part is all underneath ..all of the suspension/brakes engine/ gearbox have been grafted into the chassis of the truck..the donor vehicle being a Audi 4.2 V8 Quattro 4WD RS4/6...Its planned to be used as a daily so will have the best of both worlds..looking cool and munch the miles with modern reliability and plenty of power .. This was a early pic taken with the basic running gear in place.. Untitled by Thank you for posting it looks as interesting as your mini.
You should ask him to start a thread on it?
|
| |
|
|
|
|
|
|
|
They look really cool but I think those tea strainer style filters kill performance. Yes i agree..i just wanted to make some..i will see how they perform when running as i still have the K&Ns if i need to swap... |
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
|
|
Well..that belongs to my friend who owns the garage who also happens to be my neighbour..I met him when i first left school at a restoration company we worked for and have been good friends ever since as we share the same passion in turning out sharp restorations with a bit of engineering thrown in..We both work in the fabrication/engineering world which is very useful when doing these types of builds..The truck is a 1952 chevy 3100..What you carnt see in the picture is 2 years and lots of hurdles to get over which at first seemed to never end and lots of head scratching..All of which have been dealt with and its down to a few small details before it can be taken apart to paint and prep everything..The clever part is all underneath ..all of the suspension/brakes engine/ gearbox have been grafted into the chassis of the truck..the donor vehicle being a Audi 4.2 V8 Quattro 4WD RS4/6...Its planned to be used as a daily so will have the best of both worlds..looking cool and munch the miles with modern reliability and plenty of power .. This was a early pic taken with the basic running gear in place.. Untitled by Thank you for posting it looks as interesting as your mini.
You should ask him to start a thread on it?
We have spoken about this but he's not keen on the thread thing and would rather spend the time on the truck..i will keep a regular update if people are interested..I follow your corsair build with great respect..i used to work with a guy who had a 4dr v6 on banded steels..and a local guy had a lovely 2dr with a lotus twin cam in it..both great cars i remember from school days.. |
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
|
|
So something that is vital in any build is the correct wheel choice...at first my choice was limited as originally i was going to keep the bigger brakes it came fitted with for 12"wheels ..12"steels would work but choice wise very poor or i opt for something banded which then meant i would need to fit arches which i don't won't..This choice soon changed when the cost to rebuild my 12"disk set up was not far off buying a new conversion kit for 10"wheels which then opened up massive choice in wheels...Fast forward many months and nothing really taking my fancy i spotted a set of wheels just listed on the bay which had been sat the owners garage for many years although very tatty were perfect to restore.. Laquer peel corrosion ..  Untitled by Strip..  Untitled by Prep.  Untitled by Finished painted spokes and centre caps made in house..  Untitled by |
| |
Last Edit: May 6, 2019 11:18:24 GMT by hudson66
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
|
Very nice with the wheels, what stripper did you use?
|
| |
|
|
63v8
Part of things
Posts: 232
|
|
|
|
|
Had a look at the centre caps last Monday while you were resting,very nice and look great in the wheels.See you later.
|
| |
|
|
|
|
|
|
|
|
PERFECT! I could so easily list what else id do to this build, and what colour id paint it, and and and.... I really REALLY like this build.
|
| |
|
|
|
|
|
|
|
|
Ohh a paint stripper that works! was that Starchem SynStryp?
|
| |
1994 S1 106 Rallyé
1996 Mini Cooper 1.3 MPI (Rust bucket, currently in for surgery/resto)
2003 Renaultsport Clio 172 (Daily beater)
|
|
|
|
|
|
|
Very nice with the wheels, what stripper did you use? Otherwise known as Starchem Synstrip...purchased from a local paint shop.. |
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
Ohh a paint stripper that works! was that Starchem SynStryp? It is indeed... |
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
|
|
|
PERFECT! I could so easily list what else id do to this build, and what colour id paint it, and and and.... I really REALLY like this build. Thanks..the colour ive chosen will suit the vans background as a commercial vehicle..not to everyones taste as the wife of the guy painting it thinks its very bland...! |
| |
Sqeaky Deak Classic Mini Van..
|
|
|
|
