|
|
|
May 28, 2018 18:05:23 GMT
|
I have some old wheels like these.  I want to build something like this.  images (1) by quickrack, on Flickr But I need wheels with bearings in them to mount them on stub axles.  Unless there is a way to do it without great expense?? Wiser heads please advise me? |
| |
|
|
|
|
|
May 28, 2018 18:06:05 GMT
|
|
Unless someone has a set of fronts for a few beer tokens??
|
| |
|
|
ChrisT
Club Retro Rides Member
Posts: 1,637
Club RR Member Number: 225
|
|
May 28, 2018 18:48:42 GMT
|
|
Could you get some bearings that fit within the centre hole and make up a couple of discs with holes that line up with the bolt holes to clamp either side of the wheel/bearing?
Or maybe a bearing plate from something that can be cut down and attached to the bolt holes....
Maybe cheaper and easier just to keep an eye out for a set of fronts on ebay for the right price...
|
| |
|
|
awoo
Posted a lot
Posts: 1,504
|
|
May 28, 2018 18:49:12 GMT
|
|
could you make a plate to bolt to the wheel and press a bearing in, essentially a hub to mount to the wheel and then the axle the same way as a kart wheel?
|
| |
|
|
|
|
|
|
|
Could you get some bearings that fit within the centre hole and make up a couple of discs with holes that line up with the bolt holes to clamp either side of the wheel/bearing? Or maybe a bearing plate from something that can be cut down and attached to the bolt holes.... Maybe cheaper and easier just to keep an eye out for a set of fronts on ebay for the right price...  Won off ebay for £2.20the pair so thanks man! |
| |
|
|
