dynamo to alternator conversion

comfortablynumb Posted a lot Posts: 3,068	dynamo to alternator conversion comfortablynumb @comfortablynumb
	Feb 15, 2018 17:39:35 GMT Select Post Deselect Post Link to Post Back to Top
	Afternoon all, Because I'm lazy, and you lot are the fount of all knowledge, can anyone remind me how to rewire a dynamo and regulator box to an alternator on a 1962 Anglia 105E? Done it before an a Mk2 cortina, and I know I need a lead from the large terminal to the battery, but I can't remember what to do with the regulator wiring? TIA


	Reply Quote

welshpug Posted a lot Posts: 4,372	dynamo to alternator conversion welshpug @welshpug
	Feb 15, 2018 18:39:54 GMT Select Post Deselect Post Link to Post Back to Top
	you don't need any of the regulator and its associated wiring, all you need is a small wire from the alternator to the light on the dash, regulator is part of the alternator, the big wire goes to the starter and alternator and off to battery positive.
	ZX 16v, 205 GTI. my ZX's project thread - retrorides.proboards.com/thread/151997/16v-project-pt2-power-upgrades

	Reply Quote

comfortablynumb Posted a lot Posts: 3,068	dynamo to alternator conversion comfortablynumb @comfortablynumb
	Feb 15, 2018 18:57:07 GMT Select Post Deselect Post Link to Post Back to Top
	Thanks, I knew the reg box had to go, but I thought there was something more I needed to do with the wiring like a jumper lead? could be my memory is playing tricks!


	Reply Quote