|
|
|
Nov 18, 2017 15:38:06 GMT
|
|
Hi all a mate has a Skoda 130 gearbox (circa 1982) on a trike and needs the whole input shaft surround pipe thing with the oil seal in it. Any ideas who would do old Skoda bits?
|
| |
|
|
jikovron
Part of things
mechanical chaos
Posts: 633
|
|
Nov 18, 2017 20:27:16 GMT
|
www.skoparts-international.com/ is a good starting point in the UK Your mate will need to work out which version of release bearing guide tube is required as its dictated by the input shaft as a guide: Pre 84 105/120 4 speed use a 20-30-7 shaft seal with an input shaft that is plain ended where it goes into the spigot bearing. post 84 105/120/130/136 4 and 5 speed use an extended lip 20-30-7-11 shaft seal with an input shaft that is grooved for an o ring where it enters the spigot bearing.
|
| |
|
|
|
|
