Model: Rover P6 3500v8 auto
MOT: March 2017
Tax: Free!
Miles: 93,000
Location: Ayrshire Scotland
Price: £1750
Contact: pm
I'm selling my P6 as I just don't use it. I had a bit of a battle with the cooling system but fitted a new low temp stat and had the radiator re-cored and all now seems to be well (£175 quid)
The car is very solid underneath but it needs work to the rear door bottoms and the front of the wings. The interior is black leather and in nice shape other than a split in the drivers seat.
The gear selector trim is missing for some reason. I replaced the gearbox sump gasket and I recon I over tightened it and nipped the new gasket as it still leaks. I changed the fluid at the time and the gearbox works well. The rear bumper isn't the best as when I bought it didn't have any bumpers so had to take the first set I could get my hands on. Also the speedo doesn't work and a few other little niggles.
It drives well, has plenty of power. A lot of them are rot boxes but this other than a few exterior bits is solid so a would be good base for a rolling resto.
I'd recommend you coming to have a look at it first before committing to buy.
I'll no doubt be kicking myself for selling it in 6 months but I'm just not using it and it's just sitting in the garag.
Pictures taken in the summer obviously.
IMG_0398 by cort16, on Flickr
IMG_0400 by cort16, on Flickr
IMG_0402 by cort16, on Flickr
IMG_0403 by cort16, on Flickr
IMG_0405 by cort16, on Flickr
IMG_0406 by cort16, on Flickr
IMG_0407 by cort16, on Flickr
IMG_0410 by cort16, on Flickr
IMG_0414 by cort16, on Flickr
MOT: March 2017
Tax: Free!
Miles: 93,000
Location: Ayrshire Scotland
Price: £1750
Contact: pm
I'm selling my P6 as I just don't use it. I had a bit of a battle with the cooling system but fitted a new low temp stat and had the radiator re-cored and all now seems to be well (£175 quid)
The car is very solid underneath but it needs work to the rear door bottoms and the front of the wings. The interior is black leather and in nice shape other than a split in the drivers seat.
The gear selector trim is missing for some reason. I replaced the gearbox sump gasket and I recon I over tightened it and nipped the new gasket as it still leaks. I changed the fluid at the time and the gearbox works well. The rear bumper isn't the best as when I bought it didn't have any bumpers so had to take the first set I could get my hands on. Also the speedo doesn't work and a few other little niggles.
It drives well, has plenty of power. A lot of them are rot boxes but this other than a few exterior bits is solid so a would be good base for a rolling resto.
I'd recommend you coming to have a look at it first before committing to buy.
I'll no doubt be kicking myself for selling it in 6 months but I'm just not using it and it's just sitting in the garag.
Pictures taken in the summer obviously.
IMG_0398 by cort16, on Flickr
IMG_0400 by cort16, on Flickr
IMG_0402 by cort16, on Flickr
IMG_0403 by cort16, on Flickr
IMG_0405 by cort16, on Flickr
IMG_0406 by cort16, on Flickr
IMG_0407 by cort16, on Flickr
IMG_0410 by cort16, on Flickr
IMG_0414 by cort16, on Flickr