Not the hotpoint variety...
I need some washers for the ends of the front driveshafts on my 91 Pajero. The washers take up end float between the outer face of the hub and the c-washer on the end of the shaft. I believe they should be brass but the only one left on the car certainly wasn't. Without them the noise is awful!
Can anyone advise where I can get replacements from? I can't find any info via the Pajero owners forum. I have the measurements as;
Internal diameter - 132mm
Max external diameter - 145mm
I'd guess there's a nominal thickness, if they were 1mm thick I'd probably need a couple each side.
If anyone has any ideas that would help me out massively! It's the only thing postponing my MOT!
I need some washers for the ends of the front driveshafts on my 91 Pajero. The washers take up end float between the outer face of the hub and the c-washer on the end of the shaft. I believe they should be brass but the only one left on the car certainly wasn't. Without them the noise is awful!
Can anyone advise where I can get replacements from? I can't find any info via the Pajero owners forum. I have the measurements as;
Internal diameter - 132mm
Max external diameter - 145mm
I'd guess there's a nominal thickness, if they were 1mm thick I'd probably need a couple each side.
If anyone has any ideas that would help me out massively! It's the only thing postponing my MOT!
