Welcome Guest. Please Login or Register.

bit of delrin needed

« Prev
1
Next »

VW Posted hell of a lot Posts: 6,000	bit of delrin needed VW @vw
	Jul 2, 2016 20:57:33 GMT Select Post Deselect Post Link to Post Back to Top
	I need to make 2 bushes, 42mm diameter and about 8mm thick so I don't need alot, enough to make a mistake, 2 bushes and a bit to hold in the chuck so something like 2-3" of 45mm bar would do fine. Struggling to find anything without buying alot more than I need. I could make do with some more cube shaped lumps if need be. Thanks.


	Reply Quote

skkylinedave Posted a lot Posts: 1,601	bit of delrin needed skkylinedave @skkylinedave
	Jul 2, 2016 21:45:56 GMT Select Post Deselect Post Link to Post Back to Top
	I can get it from my local nuts and bolts supplier , have you tried that ? If noy you can get 50mm d x 100mm posted for £10 on Ebay .
	Last Edit: Jul 2, 2016 21:46:16 GMT by skkylinedave

	Reply Quote

VW Posted hell of a lot Posts: 6,000	bit of delrin needed VW @vw
	Jul 2, 2016 21:50:49 GMT Select Post Deselect Post Link to Post Back to Top
	Whats your fixings shop doing selling delrin? Theres a good fixings shop near the workshop, ill give them a go. I did check ebay but must have missed that listing, ill check again, thanks.


	Reply Quote

skkylinedave Posted a lot Posts: 1,601	bit of delrin needed skkylinedave @skkylinedave
	Jul 2, 2016 22:01:50 GMT Select Post Deselect Post Link to Post Back to Top
	They sell all sorts , drive belts for industrial application etc , some hydraulics and pneumatics etc . I'm in motorsport valley so they supply some of those places with there more mundane parts . Bloody good place , they can get me wierd obscure imperial bolts in a4 stainless in 24 hrs ! Anyway first place i looked , might find it cheaper www.ebay.co.uk/itm/ACETAL-DELRIN-PLASTIC-POM-NYLON-ROD-SHAFT-BAR-6MM-DIAMETER-VARIOUS-LENGTHS-/272045643354?var=&hash=item3f572f165a:m:mlOKlklvZKx6e9bpc8V53YQ


	Reply Quote

VW Posted hell of a lot Posts: 6,000	bit of delrin needed VW @vw
	Jul 2, 2016 22:05:39 GMT Select Post Deselect Post Link to Post Back to Top
	Sounds like a good shop. Even in sheffield with all its engineering getting imperial bolts is a pain! Loads of machine shops though. Thanks for the link


	skkylinedave likes this Reply Quote

Retro Rides Privacy Statement