benjy_b
Yorkshire and The Humber
Posts: 409
|
|
|
|
|
I've bought a JSP Force 8 Respirator and I'm looking to buy the appropriate filters for my needs.
What would you recommend for general diy (woodwork, sanding plaster, painting) and light aerosol paint use?
It seems there are dust, A1 & A2 I've come across so far.
|
| |
2005 Subaru Forester 2.5XT
1999 BMW E36 318i Touring with OM605 Mercedes Engine
1996 Lada Riva with Honda S2000 Engine
|
|
|
|
|
|
|
|
Its been a while ... But P1 ,P2 , and P3 are the more common type of 'levels' , P1 being at the bottom,P3 at the top of the types that the everyday person needs.
You get 'higher' rated specs than the P3, but you won't need them.
If its just physical dusts you can get away with P1.
Not familiar with the brand of respirator you mentioned. So just going on what i remember from dealing with the 'industrial spec' type stuff i used to handle.
|
| |
|
|
|
|
benjy_b
Yorkshire and The Humber
Posts: 409
|
|
|
|
|
Greatly appreciated, thank you
|
| |
2005 Subaru Forester 2.5XT
1999 BMW E36 318i Touring with OM605 Mercedes Engine
1996 Lada Riva with Honda S2000 Engine
|
|
