Determining PCD of these wheels?

jiminwatford Posted a lot Posts: 2,603	Determining PCD of these wheels?jiminwatford @jiminwatford
	May 20, 2015 18:53:03 GMT Select Post Deselect Post Link to Post Back to Top
	Is there anything on these which tells the PCD? They were fitted to a Fiat so should be 98x4 but used non standard bolts and wanted to be sure before selling Thanks


	Reply Quote

Good Scrap Part of things Posts: 290	Determining PCD of these wheels?Good Scrap @goodscrap
	May 20, 2015 20:03:29 GMT Select Post Deselect Post Link to Post Back to Top
	Measure diagonally across the holes using a steel rule, use the one side of the hole, i.e. the left side of both holes If you have a digital calliper, using the internal jaws you can measure the hole size and zero the display at this point, then measure diagonally and you will get the exact pcd as you've already taken off the hole size. Brian


	Reply Quote

nigelbickle Posted a lot Posts: 1,552	Determining PCD of these wheels?nigelbickle @nigelbickle
	May 26, 2015 8:08:53 GMT Select Post Deselect Post Link to Post Back to Top
	Fiats are 4 x 98. Wobble bolts will get the more common 4 x 100 on.


	Reply Quote