I've got my SD1 V8 running on a pair of Ford EDIS coilpacks on the side of the plenum using an old set of leads I originally trimmed to fit with the coilpacks behind the carbs. The leads just reach over to all the plugs enough for the engine to run but is a mess.
I want to make all new leads to suit my installation, I have a ht lead crimping kit and have done a couple of sets in the past so physically making the leads is not a concern.
What I want to know is does anyone know of a supplier of the complete Ford type coilpack ht lead ends, plastic clamp thing, boot and terminal?
I found this but it lists as being out of stock www.megasquirt-v8.co.uk/ms_generic_parts.php
I want to make all new leads to suit my installation, I have a ht lead crimping kit and have done a couple of sets in the past so physically making the leads is not a concern.
What I want to know is does anyone know of a supplier of the complete Ford type coilpack ht lead ends, plastic clamp thing, boot and terminal?
I found this but it lists as being out of stock www.megasquirt-v8.co.uk/ms_generic_parts.php
