The time has come to put PML up for sale. I have been through this several times before but now is the right time. I have taken the car as far as I am prepared to go and don't want to do anything else to it.
The car is quite well know on the forum and has been around for a while.
I bought the car as a standard, low mileage 1.1L in 2008 and have done the following since then
1700 crossflow built by Mike Stewart Performance Engineering with machining and dynoing done at AGRA Race Engines in Dundee - made 138bhp at the flywheel on the test rig.
Twin Weber 40 carburettors with mesh filters
Bestek electronic ignition set up with 90deg Bosch cap
Magnecor leads
Stud and nut head conversion
Felpro Competition Head Gasket
Steel rocker posts
Kent 234 cam
Triple seat stainless valves
Alloy rocker cover
Lightened and balanced bottom end
AP racing clutch
Custom built 4 speed XR2 gearbox with S1 RST LSD
Full Ashley exhaust system with wrapped manifold
Custom built high capacity radiator
Custom oil breather pot and assembly
Facet electric fuel pump with Filter King regulator fitted in the engine bay
AVO coilovers on the front with matching shocks and springs on the rear
XR2 front hubs and calipers
Vented discs
Goodridge braided hoses all round
Adjustable panhard rod
New drums and shoes on the rear
Polybushed all round - Superflex bushes, not the cheaper copies
Diamond cut Supersport alloys with new 175/50 Yokohamas
Complete respray over the winter in the original Ford Titan Blue.
Original Ford wings
4 spoke RS steering wheel
90 spec ( I think) Recaro front seats
4x Ford mats
Black and silver pressed plates - original white and yellow pressed plates also come with the car
I can't think of much else but I know that there is more. I will amend the advert as I recall stuff.
This is a serious sale and there will be very little if any movement on the price.
Car drives very well both when pottering around town as well as when being pushed on.
Serious enquiries only please. Additional spares may come with the car, depending on negotiation etc. If they aren't wanted I will post them for sale later.
Pictures below. If you want specific pictures please PM me and I will either post them or email them to you.
The car is quite well know on the forum and has been around for a while.
I bought the car as a standard, low mileage 1.1L in 2008 and have done the following since then
1700 crossflow built by Mike Stewart Performance Engineering with machining and dynoing done at AGRA Race Engines in Dundee - made 138bhp at the flywheel on the test rig.
Twin Weber 40 carburettors with mesh filters
Bestek electronic ignition set up with 90deg Bosch cap
Magnecor leads
Stud and nut head conversion
Felpro Competition Head Gasket
Steel rocker posts
Kent 234 cam
Triple seat stainless valves
Alloy rocker cover
Lightened and balanced bottom end
AP racing clutch
Custom built 4 speed XR2 gearbox with S1 RST LSD
Full Ashley exhaust system with wrapped manifold
Custom built high capacity radiator
Custom oil breather pot and assembly
Facet electric fuel pump with Filter King regulator fitted in the engine bay
AVO coilovers on the front with matching shocks and springs on the rear
XR2 front hubs and calipers
Vented discs
Goodridge braided hoses all round
Adjustable panhard rod
New drums and shoes on the rear
Polybushed all round - Superflex bushes, not the cheaper copies
Diamond cut Supersport alloys with new 175/50 Yokohamas
Complete respray over the winter in the original Ford Titan Blue.
Original Ford wings
4 spoke RS steering wheel
90 spec ( I think) Recaro front seats
4x Ford mats
Black and silver pressed plates - original white and yellow pressed plates also come with the car
I can't think of much else but I know that there is more. I will amend the advert as I recall stuff.
This is a serious sale and there will be very little if any movement on the price.
Car drives very well both when pottering around town as well as when being pushed on.
Serious enquiries only please. Additional spares may come with the car, depending on negotiation etc. If they aren't wanted I will post them for sale later.
Pictures below. If you want specific pictures please PM me and I will either post them or email them to you.
