After much deliberation i've decided i sadly don't have the time to have this as a project anymore and feel perhaps someone else'd give it the love that i can't because of moving away for college
The car is sold as a standard spec rolling shell, but includes the engine
everything i have taken off is included.
So the spec follows:
currently registered as sorn,
993cc on logbook,
70k genuine miles,
3 previous Owners from new,
Sadly no service history,
green cheq interior,
brown carpets,
rear seatbelts fitted,
Brown sport dash with vent, clock and cigarette blanks
The shell it's self:
-Includes :
2x brand new sills
2x new rear arches
2x new front wings
1x new battery tray
It also comes with a second interior from an A reg hatch, which is green everything!! carpets, dash the works,
so between both interiors included you could mix and match to make what you want
and the rust on the shell-
it's good for it's age baring in mind it's a nova.
ive had alot worse turn up at my workshop to collect parts while still roadworthy!!
needs abit of welding on the p/s sill,
small bit on the cross brace behind the valance under the radiator,
a small hole in the battery tray,
headlight areas sorting,
tiny hole in d/s door apart from that the doors are solid!
the rear arch to boot pannels on both sides.
Any other rust is purely surface and has been rust treated
I HAVE LISTED ALL THE RUST AREAS THAT REALLY NEED SOME KIND OF ATTENTION JUST SO YOU KNOW WHAT YOUR LOOKING AT.
This is sold as a rolling shell project, with no engine, although i do still have the gearbox and a few odd bits,
it will be on standard suspension and some 13" steels i have laying around
£750
Located in Thaxted- Essex
Can deliver at extra pre arranged cost.
Here is a link to the original project thread-http://www.pngclub.com/forum/showthread.php?175177-My-Retro-Florida-Green-Mk1-Nova-Saloon-First-Car-Project
The car is sold as a standard spec rolling shell, but includes the engine
everything i have taken off is included.
So the spec follows:
currently registered as sorn,
993cc on logbook,
70k genuine miles,
3 previous Owners from new,
Sadly no service history,
green cheq interior,
brown carpets,
rear seatbelts fitted,
Brown sport dash with vent, clock and cigarette blanks
The shell it's self:
-Includes :
2x brand new sills
2x new rear arches
2x new front wings
1x new battery tray
It also comes with a second interior from an A reg hatch, which is green everything!! carpets, dash the works,
so between both interiors included you could mix and match to make what you want
and the rust on the shell-
it's good for it's age baring in mind it's a nova.
ive had alot worse turn up at my workshop to collect parts while still roadworthy!!
needs abit of welding on the p/s sill,
small bit on the cross brace behind the valance under the radiator,
a small hole in the battery tray,
headlight areas sorting,
tiny hole in d/s door apart from that the doors are solid!
the rear arch to boot pannels on both sides.
Any other rust is purely surface and has been rust treated
I HAVE LISTED ALL THE RUST AREAS THAT REALLY NEED SOME KIND OF ATTENTION JUST SO YOU KNOW WHAT YOUR LOOKING AT.
This is sold as a rolling shell project, with no engine, although i do still have the gearbox and a few odd bits,
it will be on standard suspension and some 13" steels i have laying around
£750
Located in Thaxted- Essex
Can deliver at extra pre arranged cost.
Here is a link to the original project thread-http://www.pngclub.com/forum/showthread.php?175177-My-Retro-Florida-Green-Mk1-Nova-Saloon-First-Car-Project
