|
|
|
Apr 28, 2007 19:13:52 GMT
|
wheel adapters where from & r they ok to use, i've never used these or any spacers on the cars i've own, i like a straight bolt on setup but i may have to have adaptors for the wheels for my nxt ride! info needed, have you used them?  |
| |
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
Apr 28, 2007 19:50:09 GMT
|
|
yep no probs.. just make sure you get good quailty ones that are hub eccentric. i had some eibach ones that were really good. what fitment are you after? then i can point you in the right direction.
|
| |
|
|
|
|
|
Apr 28, 2007 20:21:09 GMT
|
i have a 5stud car & want to fit some 4x100 that are really really deep dished & matt black  |
| |
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
|
|
|
Apr 28, 2007 20:51:51 GMT
|
what pcd is the 5 stud? there's lots of adaptors to go from 4x100 to other PCD wheels (for fitting ACVW or Porker wheels to WCVWs usually) but not many to go from 5 stud to 4x100 wheels. They also push your wheels out by 25mm usually so make sure you take that into account when measuring how much dish you want. Tread sticking out of the arch when viewed from above is an MoT failure so arch rolling may be needed once that extra 25mm is taken into account. You may need to get them specially made (£££££), or alternatives can be to get hubs redrilled or your wheels redrilled (also fairly pricey). This is the cost of being different  |
| |
Never trust a man
Who names himself Trevor.
Or one day you might find
He's not a real drug dealer.
|
|
|
|
|
Apr 28, 2007 21:48:56 GMT
|
to me redrilling the the hub/wheel mounting flange seems the easy-ist & most "factory" to me! if i end up having to go the adaptor route what shops/companys make them cause i cant find them & i've been asking locally & looking to no avail!!!  ( |
| |
Mini 998cc grp bonnet & boot, lightend shell, 6-point cage, soon to have a turbo on the 998 engine (t2 frm a r5gt) rs turbo intercooler, hoping to get 120ish bhp?
father is building a Mini Van 1330, 45 weber, 100bhp@wheels
'RIP' 1.8 Metro GTi, 15.23 1/4mile
|
|
(