`state
Yorkshire and The Humber
Posts: 1,215
|
|
|
|
|
Any one know any where that sells cheap exhaust bends? Had a look on ebay but they seem abit expensive on there. Just need mild steel ones. Must be mandrel bent ones and not the crappy pipe bender ones. Cheers on advance guys.
|
| |
Look at all the plastic people who live without a care.Try to sit with me around my table,but never bring a chair.
|
|
bobman
Part of things
Posts: 109 
|
|
|
|
|
Know anyone with afew old systems lining around you could salvage them off, apart from that I cant help as I ain't local
|
| |
|
|
grumpy
Part of things
Posts: 557
|
|
|
|
|
I don't thing about 12.50 a bend delivered is expensive , not for mandrel bent tube .
|
| |
|
|
`state
Yorkshire and The Humber
Posts: 1,215
|
|
|
|
|
You've clearly got deeper pockets than me then.
|
| |
Look at all the plastic people who live without a care.Try to sit with me around my table,but never bring a chair.
|
|
|
|
|
|
|
|
I'm making my exhaust system out of cheap and cheerful plastic waste pipe & fittings. Once the design is sorted I'll add pop rivet or self tapper to the fitting to lock the pipe to the right angles. Then it'll be off to an exhaust specialist to get them to replicate the plastic system in metal.
Paul H
|
| |
|
|
|
|
|
|
|
|
Go to ats or quick fit or somewhere like that and ask to have a rummage in there scrap bin
|
| |
|
|
benzine
Part of things
Posts: 333
Club RR Member Number: 87
|
Cheap exhaust bends neededbenzine
@benzine
Club Retro Rides Member 87
|
|
|
I got some from here. Looks like there's only one size - 38mm / 1.5" but that's what I needed. Not the tightest bends but good enough quality and I got a load of 180 degree bends so I can cut them up |
| |
|
|
