I decided to take a punt on this when it appeared on ebay as it was local to me and cheap enough. I then forgot id bid on it and lo and behold I was the only bidder so won it for very little cash. So I went in the new disco this morning to pick it up and overall it looks to be a good useable trailer. Its going to need a bit of work but it doesn't look too bad and should be good for using for this years show season.
Dimensions are 14ft long with a bed 11ft 3inches by 6ft. I think I could lengthen the bed forwards about another foot without causing problems but is currently long enough for either of my retro's and I wouldn't want to put the disco on a single axle trailer anyway. Work wise there is a bit of welding needed near the hitch, the brakes need some attention, the jockey wheel is curse word, it needs a winch and the tilt bed mechanism reinstating, a good coat of rust killer and then some paint. Ive no idea of the age of the trailer but I suspect its not exactly young.
Dimensions are 14ft long with a bed 11ft 3inches by 6ft. I think I could lengthen the bed forwards about another foot without causing problems but is currently long enough for either of my retro's and I wouldn't want to put the disco on a single axle trailer anyway. Work wise there is a bit of welding needed near the hitch, the brakes need some attention, the jockey wheel is curse word, it needs a winch and the tilt bed mechanism reinstating, a good coat of rust killer and then some paint. Ive no idea of the age of the trailer but I suspect its not exactly young.
