rod
Posted a lot
Posts: 1,953
|
|
Apr 17, 2007 16:42:17 GMT
|
|
Cant find my mk1/2 escort manual at the moment ...Running pipes on my new project ,no old ones to copy! The servo has one take off port ,this pipe will run to a 'T' piece ,one side of 'T' to front lines left /right.The other side of 'T' to rear lines left /right.All via the correct flexy lines of course ! Am I right?
|
| |
|
|
slater
Club Retro Rides Member
Posts: 6,390
Club RR Member Number: 78
|
|
Apr 17, 2007 17:13:22 GMT
|
|
If its a single line master cylinder then yes your right
|
| |
|
|
rod
Posted a lot
Posts: 1,953
|
|
Apr 17, 2007 18:01:42 GMT
|
|
thanks for that ! Yes it is only one port ,so single line (so probably early escort?) Its on a kit car that is Escort based .Capri rear brakes /mk2 escort fronts.
|
| |
|
|
slater
Club Retro Rides Member
Posts: 6,390
Club RR Member Number: 78
|
|
Apr 17, 2007 18:21:05 GMT
|
You might need to put a bias valve in between the front and back, but then again it could be ok  |
| |
|
|
rod
Posted a lot
Posts: 1,953
|
|
Apr 17, 2007 18:25:02 GMT
|
|
Hmmmmm.............. was thinking that ! But apparently the capri rears are same as escy rears anyway? Will have to wait and see how the beast stops !Only light body ,so maybe the case ! On my Locost (ford running gear ) I left off the servo ,as it stopped VERY well without!
|
| |
|
|
